开云体育

The said positioning problem with QTR under win10 only arises when using the comma as the system-wide decimal character, as in the majority of the European countries. My tests suggest the following

Hi all. This morning I'm trying to print on a plate in a carrier. The printer seems to be stuck on "receiving data". This is the first time this is happening. Can anyone shed some light? I tried

There is a manual workaround that I have used if on a PC using the Main QTR Print Screen. 1- Put the quad file in as if going to print 2- Right click on it and you can see the quad ink curve(s)

Hi Greg If this "QTR/Profiles/Quad5000 folder/" this is indeed your folder name, the problem is the space in the name -- change the space to _ or - No special characters are allowed in folder

Red River is my go-to source for all kinds of photo paper, even 2- and 4-ply rag matte board.

Thanks, Mike. Red River Glossy seems like the way to go. Your digital negative method looks amazingly impressive, though daunting for those of us who have used QTR only in fairly simple ways. It’s

From memory: InstallP5000=4900.command regards -Walker

On my website I describe a method for making digital negatives for silver gelatin prints using Red River glossy paper. It does not have a watermark on the back of the paper. A similar question of

This is the name InstallP5000.command from the QTR/Profiles/Quad5000 folder/ do I have to change it to InstallP5000-greg.command or something else inbetween installP5000 and command? I have never had

Hi Henrick Well that's really strange. A couple more things: Try it in inches. I think you may have 2 files -- one for mm and one for in. Combinations are good: each file with both mm and

The install script name is crucial. Should at least start with InstallP5000 then -extra stuff then .command i.e.: InstallP5000-mine.command Roy gregbrophy.com@groups.io> wrote:

The P5000 uses the 4900 ppd so ad the appropriate =4900.command into the command file name and it will work -Walker

Hi, I am trying to install a profile on an intel mac using qtr 2.8.2 for a p5000. The printer is already installed and has profiles on it already but when I try to install a new profile, I get this

Hi there ! I am using Richard Boutwell's program QuadToneProfiler-DN v3 to create .quad curve for the gold toned Vandyke Brown process... I am using Bergger COT320 paper and Tecco SF140

Dear Roy: Thank you very much for responding. Here is a minimum example in which I reproduce a case which was part of the previous post #19313 ( /g/QuadToneRIP/message/19313 ) of

Hi Hendrick Your calculations look correct as far as I can see. But there's really no way to help without seeing what you are actually doing and getting. You need to start very simple -- one image

Hi Jeff Could you elaborate on using piezo vapors to clean a print head? Sandy

Dear all: I apologize for bothering you again. I just noticed that even the image placement using inches does not work as expected: Take an A4 sheet of size (8.26'' x 11.69'') minus the non-printable

The short answer is no. There are just too many variables that do not ride along with the output quad file. The first problem: there is no way to "unlinearize" back to the initial partitions without

On an A4 sheet I printed squares placed such that they should touch. They should neither overlap not be separated. QTR does what it should if the placement is given in inches. But it is not capable to