开云体育

7800 and 9800 are still very useful. I have a 7800 and 7880. Picked up each for dirt cheap and cleaned the capping stations, the wipers, the printhead (with piezo vapours). The 7800 is running a

Anyone know if Vivid Light Magenta is the same ink formulation across all ink lineups? eg: K3, HDR etc... Can I buy VLM for the 7890/9890/9900 and use it in a 7880 or 9880 in refillable carts? Is it

Hello All, I have taken a very long break from making digital negatives for gum over Pl/Pd. I've decided to get back to it. I was using a 9800 with Cone K7 inks. The inks are now way too old, and the

1) STS Inks wj824 sales@... can make it on request. Gloss optimizer no longer shows up in inventory search. 2) Octoink has wj824 mpn in stock. Gloss optimizer for Epson r800, r1800,

Thanks folks, looks like the stuff from Inkowl and Inkpot is the wj824 too. It's described as Epson compatible gloss optimizer for the same printers as the octoink.

There was a temporary problem with the product pages of octoink, recently. But they are online again and it seems wj824 is in

I had a chat with someone from Octoink in December, they have large amount of WJ824 in stock. I receive 1 Liter this week.

Joe Costello, joe@.... WJ824 from STS is the gloss optimiser you want. --- Blayne Puklich Minneapolis, MN PGP Key ID: 0xC52CA6C1 * mailto:blayne at puklich.com I'd

I can't answer your question. You might try asking Joe Castello (sp?) at STS. I'm not at home, so I can't get phone numbers for you. Paul [email protected]> wrote:

thanks for the reply Paul. For context is the glop-wj824 supposed to be the same gloss optimizer that Epson made for the EPSON Stylus Photo R800, R1800, R1900,

I made my own dilution base for a while, but I stayed away from getting into glossy or semi glossy mixes. I was afraid of making a mix that would clog inkjet heads. So when I went to printing

I scoured the internet. Found a Canadian website with GO. https://www.inkpot.ca/?p=product&product=6308

I haven't heard back from Joe, so I'm waiting on a reply from the general sales team about glop = wj824. On the octoinks it looks like they're sold out. Paul, did you ever have a formula to make my

The skew message frequency is about average, just keep trying? - once it accepts the carrier the first time it tends to settle down.? You do need to be fussy about cutting the carrier board

Thanks Berel, Yes I’d love a photo. I’d be using it to print digital negatives/film. I would say 50% if the time the 3880 says paper askew when I try loading via front feed with the film taped to

Are you able to save QTR print settings, and recall them successfully? That seems to be the main functionality that people lose when upgrading to the newer Mac OS's. -- instagram.com/itsmrjack_ (

For a DTP carrier I cut a piece of 2 ply matte board about 2" bigger all around than my plate, I then make a PS file of a black rectangle the same size as my plate, mark the edge that goes first into

Thanks Greg. Yes I had already set a new paper type in the installer specifically for DTP. I had not printed DTp for some time so I probably forgot the exact workflow. Best Joe Joseph P Smith MFA

You have to have both set to the same. You also have to use the Epson media installer to set the paper type. Do a search on YouTube for a video from Northlight in the U.K. on how to set it up.

No Greg. I had not yet done to that stage. Should I set it on the printer first? Joe Joseph P Smith MFA Digital Arts (Melit) MSWPP; FMPA; FBIPP; Hon. FMPS; ARPS; AFIAP Instagram: