开云体育

Hello molte@ I am currently running Epson 7800,9800, and P900 with the QTR 2.8.0 with Print-Tool -2.3.4 on an older 2014 Mac Mini 2.6hrz running macOS Monterey 12.7.6. Printing digital

Maybe try Red River light weight (7 mil thick, 42lb) glossy: https://www.redrivercatalog.com/browse/42lb-pecos-river-gloss-photo-inkjet-glossy-inkjet-paper.html I have not printed on it,

A few years ago I discovered that prints on Kirkland glossy paper looked good when framed and hung in a window so they would be backlit. The frames were Dollar Store double glass frames (photograph

Hi Berel, Where does one get the carrier? or is it just a matte board? Can you post a picture? Jess

My experience with 3880, p800 and p600 is that using the front feed option eliminates the pizza wheels. It is likely that the p900 will do the same. There is no hidden instruction, it assumes that

Hi there QTR users ! I am about to purchase licenses for QTR Print-Tool ($39 iirc) and for Richard Boutwell's QuadToneProfiler-DN (v3) (about 100 euros).... I am going to install those on my old

Thank you for sharing this article, Clay. Unfortunately, this is very timely for me, as both my iMac and MacBook Pro have been affected, despite neither being upgraded to the latest OS. Firstly, I

Does that mean that Monterey/12 and earlier is ok? What about El Capitan/10 ?? (I am very new to mac after 40 years on PC) ? -----Oprindelig meddelelse----- Fra: Jeff

Here's what sparked my question. I picked up a 7880. Didn't get used much, but has been sitting for over a decade. Ink lines are empty in spots (guessing evaporation?) My suspicion is the ink near the

I've used Piezoflush for years to clean my 3880, but recently switched to Majic Bullet, which I have found to be much more

I do not recommend alcohol at all. Piezoflush does not have that. I really recommend buying the real stuff from inkjetmall for long term storage. I don’t have any allegiance to Jon (exactly the

No, didn’t try the front feeder. We tried the pizza wheel hack on one to disengage and that created problems and there are things in a school lab that are more difficult to do than at home with

Alan, I have a P900 and fortunately I do not have the pizza wheel issue, however you mentioned in your post "Epson included a special setting to disengage the pizza wheels." Can you provide any

Hi Alan. I have a P900 and had the wheel issue. I did as was suggested to me on this forum. Fed the printer (and printed in low opacity to save ink) a few sheets of thick posterboard. Seems that the

Just curious. Did you not have any luck using the front feeder to eliminate pizza wheels on the 900? Epson included a special setting to disengage the pizza wheels.

something to consider. I use an old Mac mini i3 running Mojave to print from. It's headless. but I see old Macbooks on FB marketplace for $150.00. You can get one of those to print from. I do my

Happy New Years all. I have a question about cleaning/storage solutions. I've bought PiezoFlush from Inkjet Mall and I've also bought a clear solution from Inkjet OWL. Both offering similar

Roy, You are a Godsend. It worked. But the command for some reason had to be InstallP5300=P900.command. For some reason this printer only shows as a P5300. Then I cut and pasted all the quads into the

You are right. PrintTool is Mac only. Windows just has QTRgui - simpler and only for QTR. [email protected]> wrote:

I have to print from Photoshop on a PC/Windows machine and would love to use Print-Tool, but it's apparently Mac only. But just to confirm, is that correct? Is there something I'm missing? If so, is