You probably know this but you need to run the QTR install command for your particular printer.? That will create a ¡°virtual printer¡± that can be selected via Print Tool. ?
No, I am not using QTR to print color, using the assigned Epson SC p900 printer for color images.? Only D negs for the QTR printer, which naturally is the same Epson p900 printer.
Thanks,
SS
So printing color photos using QTR via PrintTool?? What is the name of your printer when printing color photos?
Hi, ? Yes, I have been printing color photos all week via Print Tool with not issues.? The issue appears to be that the Quad printer remains offline and I don¡¯t know how to activate.? The p900 printer direct wired and not using Air Print option.?
Thanks for your interest.
SS
Steve,
How have you printing ¡°all week¡±?? Through QTR?? Are you using the Print Tool?
When you went to print the Fixxons film what printer did you select?
Michael On 8 Aug 2024, at 16:35, Steve Sherman via < steve@...> wrote:
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
No, I am not using QTR to print color, using the assigned Epson SC p900 printer for color images. ?Only D negs for the QTR printer, which naturally is the same Epson p900 printer.
Thanks,
toggle quoted message
Show quoted text
On Aug 8, 2024, at 12:09?PM, MichaelT <mptrupiano@...> wrote:
So printing color photos using QTR via PrintTool?? What is the name of your printer when printing color photos?
Hi, ? Yes, I have been printing color photos all week via Print Tool with not issues.? The issue appears to be that the Quad printer remains offline and I don¡¯t know how to activate.? The p900 printer direct wired and not using Air Print option.?
Thanks for your interest.
SS
Steve,
How have you printing ¡°all week¡±?? Through QTR?? Are you using the Print Tool?
When you went to print the Fixxons film what printer did you select?
Michael On 8 Aug 2024, at 16:35, Steve Sherman via < steve@...> wrote:
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
So printing color photos using QTR via PrintTool?? What is the name of your printer when printing color photos?
Hi, ? Yes, I have been printing color photos all week via Print Tool with not issues.? The issue appears to be that the Quad printer remains offline and I don¡¯t know how to activate.? The p900 printer direct wired and not using Air Print option.?
Thanks for your interest.
SS
Steve,
How have you printing ¡°all week¡±?? Through QTR?? Are you using the Print Tool?
When you went to print the Fixxons film what printer did you select?
Michael On 8 Aug 2024, at 16:35, Steve Sherman via < steve@...> wrote:
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
For the past few weeks, when I've been outputting negatives using QTR (and PiezoProDN), my images have not been flipping horizontally as directed by the software. It's 100% random, no settings are changing when this occurs, and it happens maybe 10-15% of the time. Is anyone else seeing this or having this issue? It's wasting a heck of a lot of material...
|
Hi, ? Yes, I have been printing color photos all week via Print Tool with not issues. ?The issue appears to be that the Quad printer remains offline and I don¡¯t know how to activate. ?The p900 printer direct wired and not using Air Print option.?
Thanks for your interest.
toggle quoted message
Show quoted text
On Aug 8, 2024, at 11:19?AM, MichaelT <mptrupiano@...> wrote:
Steve,
How have you printing ¡°all week¡±? ?Through QTR? ?Are you using the Print Tool?
When you went to print the Fixxons film what printer did you select?
Michael On 8 Aug 2024, at 16:35, Steve Sherman via < steve@...> wrote:
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
Steve,
How have you printing ¡°all week¡±? ?Through QTR? ?Are you using the Print Tool?
When you went to print the Fixxons film what printer did you select?
toggle quoted message
Show quoted text
On 8 Aug 2024, at 16:35, Steve Sherman via < steve@...> wrote:
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
The p900 Epson printer has been printing all week, now switch to Quad tone for Fixxons and the printer is offline, nothing I have Googled seems to cure the issue....thoughts ??
?
Steve Sherman
|
Thank you so much for the info David.
?
I also use a Mac. At first I fed the A4 plate directly into the printer. Then I made an A3 plate carrier for the A4 plate. The line marks are exactly in the same locations like when I fed the plate into the printer without a carrier. I'm thinking it could be a plate issue although I cannot see any lines when I peel off the protective plastic film.
?
Will try a different brand of plates and see what happens.
?
Joe?
|
I use a Mac, QTR, Epson 3880, to print Toyoba KM73 plates for DTP printing.The Platen gap is at default. My comments are only based on using the 3880. The wheel that pulls the plate carrier through the front drawer is on the right on a 3880. In order to avoid any sort of wheel marks etc I made all my plate carriers A2 and the cut out for the plate is in the middle. In Print Tool I centre the image in the A2 size print window.
On the 3880 in the front drawer opening there is a bar with small black wheels about 45mm apart across the top. While these are above the thickness of the acceptable thickness for media I did manage once to get roller marks on a plate by not loading the carrier card level into the opening. I now pull out the trays that the printed carrier/plate will land on and these give a good guide to keeping the plate holder level when feeding it in.
I also have one cardinal rule, never touch the surface of a plate until its been completely processed and hardened off.
David
|
I fashioned a carrier for the plate, hoping that this would solve the issue but I'm still getting the two horrid parallel lines down the plate. I'm at my wits end!
I printed the same image on thick poster board and there are no lines at all so it must be the plate I guess.? Next step is to try a different brand.
Ordering a couple of Torelief samples to try out. Will hopefully be back with good results.
?
Thank you all for the support.
?
Joe
|
it's frustrating that those that wrote this program didn't work our the kinks with the various platforms, thus leaving us at sea trying to figure this out.
In light of my continuing issues with printing through QTR I tried to download an older version to see if that resolves the problem. But, when I select version 2.8.0 and download the file says it cannot be moved because it is still downloading. This message does not go away. Anybody have any idea what is going on?
|
In light of my continuing issues with printing through QTR I tried to download an older version to see if that resolves the problem. But, when I select version 2.8.0 and download the file says it cannot be moved because it is still downloading. This message does not go away. Anybody have any idea what is going on?
|
Hi Stig
Thanks again for your feedback! From what I¡¯ve gathered, also from other members on the group, apart from changing plates , I have to go via a plate carrier approach and not feed the plate directly into the printer. I¡¯m looking at sourcingTorelief plates.?
So I will try that soon and?get back to you with (hopefully) positive feedback.?
Thanks again for all your help Stig.
Best
Joe Joseph P Smith MFA Digital Arts (Melit) MSWPP; FMPA; FBIPP; Hon. FMPS; ARPS; AFIAP Instagram: @smithfoto59 Facebook: Twitter: @smithjp59
Hi Joe - sorry about the late reply. I still don't think it looks like pizza wheeling. If so, you would have much more and distinct lines. The golden color of the polymer indicates that it is probably the same polymer that Kodak used on their Jet Letterpress plates. They have now discontinued their factory in Japan, so it is not possible to buy them anymore. So in any case I would recommend you to use another brand.? I had similar problems when I worked with the Jet plates some years ago, and I found out that the stripes came when I removed the protective cover film. It was somehow glued to the plate in different areas and gave a crackling sound when removing the film.? Another problem with the Jets, was that the printing paper stuck to the light/white tone areas in the plate, if the paper wasn't blotted very carefully.?
If I were you I would buy some other plates:)
All the best
Stig
Stig Stasig
,
DK-1316 Cph K
Denmark
+45 40115412
[Edited Message Follows]
Hi all. Maybe you can shed some light on this. I have just installed an Epson P900 to print on photo paper and also to produce my own DTP photogravures. Up till now I had my plates made for me in Spain.? I installed Print Tool, the Quadtone K3 Profiler and the QTR. As someone previously suggested in the group, I created a new media file based on the Epson matt paper, and edited the paper thickness and platen gap accordingly.? When I print through Print Tool and QTR Printer, the new media option I created is not available. It is only available in the Epson Print tool.
?
So I selected A4 in the Print Tool using the Quad 900 QTP and selected the appropriate DTP curve (saved from the K3 profiler). I also selected Front Feed Poster Board. When I print, I am getting pizza line marks on the plate. (Photo and screenshots of the process attached).? When I tried using the Epson Print tool (instead of Print Tool) with the saved media file as media setting, I did not get the line marks but the inking looks a bit dense. I'm really at a loss. Am I missing something? Maybe the screenshots can help. I am not using a carrier but feeding the A4 plate directly into the printer.
?
I would be grateful for any guidance anyone can provide. Unfortunately there are no workshops on the topic in Malta.?
?
Thank you so much
?
best
?
Joe
<IMG_3428.jpg><Screenshot 2024-07-30 at 09.27.37.png><Screenshot 2024-07-30 at 09.19.07.png><Screenshot 2024-07-30 at 09.11.36.png><Screenshot 2024-07-30 at 09.11.02.png>
|
Hi Joe - sorry about the late reply. I still don't think it looks like pizza wheeling. If so, you would have much more and distinct lines. The golden color of the polymer indicates that it is probably the same polymer that Kodak used on their Jet Letterpress plates. They have now discontinued their factory in Japan, so it is not possible to buy them anymore. So in any case I would recommend you to use another brand.? I had similar problems when I worked with the Jet plates some years ago, and I found out that the stripes came when I removed the protective cover film. It was somehow glued to the plate in different areas and gave a crackling sound when removing the film.? Another problem with the Jets, was that the printing paper stuck to the light/white tone areas in the plate, if the paper wasn't blotted very carefully.?
If I were you I would buy some other plates:)
All the best
Stig
Stig Stasig
Rigensgade 5, kld.tv
DK-1316 Cph K
Denmark
+45 40115412
www.fotografix.dk
toggle quoted message
Show quoted text
Den 30. jul. 2024 kl. 09.54 skrev Joe Smith <smithfoto59@...>:
[Edited Message Follows]
Hi all. Maybe you can shed some light on this. I have just installed an Epson P900 to print on photo paper and also to produce my own DTP photogravures. Up till now I had my plates made for me in Spain.? I installed Print Tool, the Quadtone K3 Profiler and the QTR. As someone previously suggested in the group, I created a new media file based on the Epson matt paper, and edited the paper thickness and platen gap accordingly.? When I print through Print Tool and QTR Printer, the new media option I created is not available. It is only available in the Epson Print tool.
?
So I selected A4 in the Print Tool using the Quad 900 QTP and selected the appropriate DTP curve (saved from the K3 profiler). I also selected Front Feed Poster Board. When I print, I am getting pizza line marks on the plate. (Photo and screenshots of the process attached).? When I tried using the Epson Print tool (instead of Print Tool) with the saved media file as media setting, I did not get the line marks but the inking looks a bit dense. I'm really at a loss. Am I missing something? Maybe the screenshots can help. I am not using a carrier but feeding the A4 plate directly into the printer.
?
I would be grateful for any guidance anyone can provide. Unfortunately there are no workshops on the topic in Malta.?
?
Thank you so much
?
best
?
Joe
<IMG_3428.jpg><Screenshot 2024-07-30 at 09.27.37.png><Screenshot 2024-07-30 at 09.19.07.png><Screenshot 2024-07-30 at 09.11.36.png><Screenshot 2024-07-30 at 09.11.02.png>
|
Hi Joe,
?
I am joining this thread because I am having the same issue. I have my platen gap set to 4.5 and my dry time set to .5 through the epson media installer as others suggest, but still with no improvement. I have a P700, but I am printing in the same fashion as you, print tool with QTR DTP curve. I am using toyobo plates, I think it must be something in relation to the Surecolor printers and not the plate. Any help on this would be awesome!
?
|
Berel, thanks but I am not using the front feed tray. I am printing negatives using Pictorico and the sheet feed.
|
Hi Stig, thanks for your feedback.
?
There is another line further down which seems to have light pizza marks. I have circled the lines in red.? I am using a box of plates that was
given to me by a colleague who stopped working on the process due to ill health. They seem to be Australian. Photos attached.
?
I'm trying to source plates from Europe so if you have any suggestions, please do let me know.
?
best
?
Joe
?
?
?
|
Hi Joe - which kind of polymerplates are you using (Brand?)? If you only have one (Thats what I can see from your photo) broad soft white stripe, it is probably not pizza wheeling.
all the best
Stig
Stig Stasig
Rigensgade 5, kld.tv
DK-1316 Cph K
Denmark
+45 40115412
www.fotografix.dk
toggle quoted message
Show quoted text
Den 30. jul. 2024 kl. 10.03 skrev Joe Smith <smithfoto59@...>:
[Edited Message Follows]
Hi all. Maybe you can shed some light on this. I have just installed an Epson P900 to print on photo paper and also to produce my own DTP photogravures. Up till now I had my plates made for me in Spain.? I installed Print Tool, the Quadtone K3 Profiler and the QTR. As someone previously suggested in the group, I created a new media file based on the Epson matt paper, and edited the paper thickness and platen gap accordingly.? When I print through Print Tool and QTR Printer, the new media option I created is not available. It is only available in the Epson Print tool.
?
So I selected A4 in the Print Tool using the Quad 900 QTP and selected the appropriate DTP curve (saved from the K3 profiler). I also selected Front Feed Poster Board. When I print, I am getting pizza line marks on the plate. (Photo and screenshots of the process attached).? When I tried using the Epson Print tool (instead of Print Tool) with the saved media file as media setting, I did not get the line marks but the inking looks a bit dense. I'm really at a loss. Am I missing something? Maybe the screenshots can help. I am not using a carrier but feeding the A4 plate directly into the printer.
?
Is anyone going through the Epson Print dialog instead of Print Tool etc to print his plates? Would be great to know what the settings are?
?
I would be grateful for any guidance anyone can provide. Unfortunately there are no workshops on the topic in Malta.?
?
Thank you so much
?
best
?
Joe
<IMG_3428.jpg><Screenshot 2024-07-30 at 09.27.37.png><Screenshot 2024-07-30 at 09.19.07.png><Screenshot 2024-07-30 at 09.11.36.png><Screenshot 2024-07-30 at 09.11.02.png>
|
Hi all. Maybe you can shed some light on this. I have just installed an Epson P900 to print on photo paper and also to produce my own DTP photogravures. Up till now I had my plates made for me in Spain.? I installed Print Tool, the Quadtone K3 Profiler and the QTR. As someone previously suggested in the group, I created a new media file based on the Epson matt paper, and edited the paper thickness and platen gap accordingly.? When I print through Print Tool and QTR Printer, the new media option I created is not available. It is only available in the Epson Print tool.
?
So I selected A4 in the Print Tool using the Quad 900 QTP and selected the appropriate DTP curve (saved from the K3 profiler). I also selected Front Feed Poster Board. When I print, I am getting pizza line marks on the plate. (Photo and screenshots of the process attached).? When I tried using the Epson Print tool (instead of Print Tool) with the saved media file as media setting, I did not get the line marks but the inking looks a bit dense. I'm really at a loss. Am I missing something? Maybe the screenshots can help. I am not using a carrier but feeding the A4 plate directly into the printer.
?
Is anyone going through the Epson Print dialog instead of Print Tool etc to print his plates? Would be great to know what the settings are?
?
I would be grateful for any guidance anyone can provide. Unfortunately there are no workshops on the topic in Malta.?
?
Thank you so much
?
best
?
Joe
|
I had the same problem last week printing multiple DTP plates using a carrier - 3880, QTR,Print Tool,? - I resolved? it? by? closing? the? front? feed tray after each print, and re-opening it when prompted? to after clicking on print.? I have absolutely no idea why this works? - but it does .? Worth a try before ant more drastic solutions.
?
Berel Lutsky
|
