开云体育

We set one of these printers up in a workshop last year and got it working just fine. I seem to remember there being a support tray that can be pulled out to support the carrier as it is printed. I

I'm struggling with getting the 5370 to work with DTP. After trying a number of different approaches, the option that seems to want to work is creating a DTP Custom Paper Setting in the printer,

Hi, is it possible to used epson sc p9500 with qtr? thanks in advance Marek -- Ta wiadomo?? e-mail zosta?a sprawdzona pod k?tem wirusów przez oprogramowanie antywirusowe AVG. www.avg.com

Good point, Bob. I assume any of my students who are going to purchase it this semester will be purchasing the most recent, and the old one had a different name (QCDN), and I also assume people using

Would it be advisable to note that this is for version 3+ of Richards QTP-DN? Bob Hartung <christinazanderson@...> wrote:

DM, I’ve had to revise the handout probably a dozen times, and especially now that the software is called QTP-DN not QCDN and needed new screen shots. Also every time a student makes a mistake or

I’m interested, I have a L8180, does it work for direct to plate? Antonela Rabbione

QTR-CurveView is not opening the P900 profiles with 10 inks. Basically nothing happens. And suddenly it is not opening any profiles.

Hi Chris, Thanks for the detailed explanation, and for the tips about decimal points. Your explanation of the blur/average completely makes sense to me. I'll have to try it after the semester ends.?

DM, I was wondering where I said measure 3x and average on my instructions, but you must be referring to Xrite instructions correct? I don’t measure anything 3x and average. But I do blur/average

For anyone who is using the Xrite i1 for measuring targets, or Chris. I was reviewing Chris's(your) great instructions for QCDN. I like these because they are written using numbered steps (thank

Thanks for reviewing this. I have no idea. I essentially abandoned that target and printed another from the QCDN package which seems to be working fine. I always feel like there is so much to learn at

Hello!! I was wondering if anyone has experience installing QTR on Epson Ecotank printers. I’ve read in other posts that for the L1800 model, it’s possible to use the profile of the 1400/1430.

DM Neither of those files crash QCDN on my computer (Sonoma 14.7.1, QCDN 3.2) but when I open the 22 number one in QCDN I get a blank grid and a blank LAB but then I open the 21 step one and I get

Before you dump the printer you could try the well-known Windex route to dissolve the clog. Am 19.03.2025 um 21:35 schrieb HoustonYank via groups.io:

Criss thank you. I am on Windows so Print tool won't work but there is another application for windows QTRgui. It looks pretty much the same. So that should be alright. I need to print RIPped image

Thanks all for your help. I found that if I changed the .txt file to have 21 sets instead of 22, and deleted the last entry of data (line 22), saved this, and the place into QCDN, no more crashing. I

DM Can you attach the file that crashes? Chris From: [email protected] <[email protected]> on behalf of Eben Ostby via groups.io <ebenostby@...> Date: Thursday, March 20, 2025

I had this happen when I had the wrong number of entries in a file. You could try reading it in data-tool and writing it to see if that will clean it up E

If I’m understanding this correctly, I was also running into the same thing recently and the following fixed it: 1) make sure you’re selecting the correct settings before saving the .txt file of