开云体育

Yes I use a carrier sheet. a 2ply board and a thick sheet of paper underneath to hold plate. Also make sure you go into the printer and turn off "Detect Paper Meandering” and also every time before

Joe, I had problems getting the P900 to recognize the "sled" that I was using for the plates. I took clay harmon's workshop on dpt and he showed us the use of a sled - using two pieces of 2X matte

OK sorted Greg. Thanks again! One last question if you don't mind. Is there a need for a carrier sheet for the plate? I came across this somewhere. thanks Joe Joseph P Smith MFA Digital Arts

Thanks again Greg. Installing as we speak. Joe Joseph P Smith MFA Digital Arts (Melit) MSWPP; FMPA; FBIPP; Hon. FMPS; ARPS; AFIAP Instagram: @smithfoto59 Facebook:

Platen Gap is 4.5 and drying time is .5 You want the platen gap as wide as possible to avoid head strikes.

Thanks Greg! Much appreciated. Can you please tell me the value of the platen gap and the drying time per pass as they are not that clear on the screen shot. Thanks again. Will download the media

Hi Joe, You need to install the epson media installer. Copy the Fine Art Matte and change it to these settings. Greg ?

Hi all Just joined the group. I am a photographer and a printmaker and recently started working on photogravure. Had my plates made for me up till now but I have now an Epson P900. I have downloaded

Hello Dave Thank you for this useful info. I have just started doing some DTP photogravures on an Epson P900. Any idea what the media setting (paper) should be on the QTR? thanks and best

Thanks for the reply. Please note that I sent a message to support@... on June 26 and to [email protected] July 7 . Having no answer, I put this issue to the QTR group. -- JYBusson

Two different products, but discussed in the same group. I have the impression, that this creates confusion among some. Richard, wouldn't it be an idea to create a dedicated group for your

Also, those crash reports are never all that helpful, and better to email me directly at support@... with the measurements and quad files rather than using the QTR group for this kind

This has been an issue from day one, and as best as I can tell, it comes down to the app trying to update the graphs before it gets all the data. I think I finally fixed it in a new total rewrite of

Having installed QCDN on a Mac mini (OS Mojave), I have no problem for the ?preparation of linearised curves. But if I use the manual curve, qcdn crash (report? in attached file). Any idea about the

Richard, thank you very much for this. i am curious whether this was a measurement issue or if the WDG was actually darker than the PK? Follow on question is if this happens again how can I fix it? I

Another suggestion: I use QTR on a PC with a P800 printer, which replaced the 3880 and 3800. I use the front feed to avoid “pizza wheel marks” and print my digital negatives on Fixxons for

Hello Williamskg Unfortunately, both of the easier methods of creation of the QIDF are only automated in software on the MAC, which is why people keep telling everyone "Just buy a MAC"? (Boutwell

This was a tricky one. Basically, the WDG ink is SLIGHTLY darker than the PK ink in the last two steps, and the crossover calculation hits a wall. I will do some additional error-checking when loading

Hello,? I have been using my Epson 3800 to produce digital negatives using fairly conventional lookup table means.? I wish to step up my digital negative game and use QuadTone RIP instead, but I'm

You are welcome! Warmest regards -Walker