开云体育

On my website I describe a method for making digital negatives for silver gelatin prints using Red River glossy paper. It does not have a watermark on the back of the paper. A similar question of

This is the name InstallP5000.command from the QTR/Profiles/Quad5000 folder/ do I have to change it to InstallP5000-greg.command or something else inbetween installP5000 and command? I have never had

Hi Henrick Well that's really strange. A couple more things: Try it in inches. I think you may have 2 files -- one for mm and one for in. Combinations are good: each file with both mm and

The install script name is crucial. Should at least start with InstallP5000 then -extra stuff then .command i.e.: InstallP5000-mine.command Roy [email protected]> wrote:

The P5000 uses the 4900 ppd so ad the appropriate =4900.command into the command file name and it will work -Walker

Hi, I am trying to install a profile on an intel mac using qtr 2.8.2 for a p5000. The printer is already installed and has profiles on it already but when I try to install a new profile, I get this

Hi there ! I am using Richard Boutwell's program QuadToneProfiler-DN v3 to create .quad curve for the gold toned Vandyke Brown process... I am using Bergger COT320 paper and Tecco SF140

Dear Roy: Thank you very much for responding. Here is a minimum example in which I reproduce a case which was part of the previous post #19313 ( /g/QuadToneRIP/message/19313 ) of

Hi Hendrick Your calculations look correct as far as I can see. But there's really no way to help without seeing what you are actually doing and getting. You need to start very simple -- one image

Hi Jeff Could you elaborate on using piezo vapors to clean a print head? Sandy

Dear all: I apologize for bothering you again. I just noticed that even the image placement using inches does not work as expected: Take an A4 sheet of size (8.26'' x 11.69'') minus the non-printable

The short answer is no. There are just too many variables that do not ride along with the output quad file. The first problem: there is no way to "unlinearize" back to the initial partitions without

On an A4 sheet I printed squares placed such that they should touch. They should neither overlap not be separated. QTR does what it should if the placement is given in inches. But it is not capable to

Try chat gpt. Upload it and ask it to convert the file.

Hi, is there a way (utility) to recreate a .qidf file from the .quad file? Thanks.

Hello, I am new to this forum. I converted my R2880 into a black-only printer using the inks according to Paul's GCVT formulation. After two head cleans I made the first test print of Keith Cooper's

thanks for the correction and confirmation. Yes, I got a VLM cart from a 7890 and will use to fill for a 7880,

K3 no but K3 Vivid from the x880 onwards yes. -Walker

In the print dialog box of print tool select “Front-No Eject Roller” On the printer - open the front feeder tray, select Front- No Eject Roller and follow the directions

I didn't see you on Monday evening.... Your piece is still ready and waiting for you...