Tape a piece of paper or ohp to the end of the paper. That way the rollers have something to engage and should eliminate the banding.?
toggle quoted message
Show quoted text
On Mar 15, 2025, at 3:00?PM, Christina Z. Anderson via groups.io <christinazanderson@...> wrote:
?
Glad I was of help!
We have had excellent luck so far with the P5370 using P900 profiles. The only remaining problem is printing on 8.5x11 I have to limit students to 9 inch prints an inch away from the edge
of the OHP or that dreaded banding occurs.
Chris
?
On Wed, Jan 8, 2025 at 08:40 PM, Christina Z. Anderson wrote:
But the command for some reason had to be InstallP5300=P900.command. For some reason this printer only shows as a P5300. Then I cut and
pasted all the quads into the P5300 file folder, too, and they showed up fine.
Chris, thank you very much for this detail. I tried multiple time to install the p5370 with the InstallP5370=P900 before returning to this group to find what I was doing wrong. No problem at all once I changed
the command to InstallP5300=P900.
