¿ªÔÆÌåÓýGraciana,?I¡¯ve been thinking about this with a little time on my hands this weekend in Chicago. i1Profiler does actually require a ¡°color¡± to be close in nature to the base RGB color of the target. So it¡¯s too far out of spec from what i1Profiler is requiring (it¡¯s requiring monochrome bw). What you will need to do is simulate the color and then also sharpie the left and right lines black on the printed gum itself.? I¡¯ve done this recently when building CcMmKkkk environments that required me to measure pure color 128x5 targets. It showed the same error and I got around it as shown below. I¡¯ve included CMY cgats and workflow files. It¡¯s a pure magenta one, pure cyan, pure yellow. Sharpie the left and right thin lines of our color prints black before reading. Use the Cyan one to read cyan/blue targets, the magenta one to read red/magenta and the yellow one to read things on the yellow spectrum. ?? Best -Walker
cyan-21x16.txt
cyan-21x16.txt
yellow-21x16.pwxf
yellow-21x16.pwxf
yellow-21x16.txt
yellow-21x16.txt
magenta-21x16.pwxf
magenta-21x16.pwxf
magenta-21x16.txt
magenta-21x16.txt
cyan-21x16.pwxf
cyan-21x16.pwxf
|
