¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. QnetGateway
  2. Topics

Qnlink has some problems

 

Hi everyone,


Thank you in advance.


I have installed the QnetGateway and it has worked very well.

Today I am installing new QnetGateway which is updated within 30 days ago.

But It has problems in qnLink process.

When booting and/or changing the gateway, qnLink says the gateway not found in gwy list.

But the gateway exists in gwy.txt.


de DS5HVM Korea.




--
Hi everyone,

Thank you in advance.

I have installed the QnetGateway for MMDVM Board, it works very well.
Today I am installing new QnetGateway which is updated in 30 days ago.?
It has problem to link at gateway, in especial qnlink process.
The qnLink says that gateway not found in gwy listt.? But the gateway exists in gwy.txt.

de DS5HVM

qnadmin-qnlink-log2.jpg

 

The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway to load the gwys.txt file again.

From your screenshot, it looks like your linking to REF030 C okay.
 

You can send an F to refresh that file?!? And here I was restarting qnlink every time.?? Good to know!

On a side note, completely low priority feature request:? having some kind of second gwt.txt that takes precedence over the current one. Use case: ? I often use your qnadmin interface to pull the gateways from a source but it will override a manual entry I have, so I have to add it back in each time.?? If there could be a second, static, file that kind of overrides any duplicates in the gwy.txt that would be helpful for me, but only because I am lazy;?? Kind of like having something in your local hosts file that would override what is in DNS.

Thanks for all your work on this great program;
Rob
VY1RG


On Fri, May 8, 2020 at 2:12 PM Tom Early <n7tae@...> wrote:
The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway to load the gwys.txt file again.

From your screenshot, it looks like your linking to REF030 C okay.

 

Rob,

That's easy. Done!
Please see the section on qnadmin in the CONFIGURE+INSTALL file for info on how this works. (Hint: put you own defs in My_Hosts.txt and then use qnadmin to build your gwys.txt file.)

Tom N7TAE
 

Thanks Tom!?? I will give it a try tonight when I am off work.

73;
Rob, VY1RG


On Fri, May 8, 2020 at 3:02 PM Tom Early <n7tae@...> wrote:
Rob,

That's easy. Done!
Please see the section on qnadmin in the CONFIGURE+INSTALL file for info on how this works. (Hint: put you own defs in My_Hosts.txt and then use qnadmin to build your gwys.txt file.)

Tom N7TAE

 

I too have noticed the Not in list error.. Did not know a simple "F" will fix it though been using qnetadmin LS and IS that fixes it.

"Nothing adds excitement like something that is none of your business" Note I am not a doctor, I don't even play one on television John F Davis

On Friday, May 8, 2020, 06:02:38 PM EDT, Tom Early <n7tae@...> wrote:


Rob,

That's easy. Done!
Please see the section on qnadmin in the CONFIGURE+INSTALL file for info on how this works. (Hint: put you own defs in My_Hosts.txt and then use qnadmin to build your gwys.txt file.)

Tom N7TAE
 

Thank,


I have not change any files for example gwys.txt by myself.

I attatch the image file.

After booting, I am changing the reflector from ref082c to xrf071c? by radio now.

Qnlink does not link to xrf071c, so I do unlink by radio.

Sometime when booting, qnlink does not to link the reflector setted in qnconfig.

?I think qnlink has the problems to read gateway file and change the reflector.


--------- ?? ?? ---------

????: Tom Early <n7tae@...>
????: <[email protected]>
??: 20.05.09 06:12 GMT +0900
??: Re: [QnetGateway] Qnlink has some problems

The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway to load the gwys.txt file again.

From your screenshot, it looks like your linking to REF030 C okay.



--
Hi everyone,

Thank you in advance.

I have installed the QnetGateway for MMDVM Board, it works very well.
Today I am installing new QnetGateway which is updated in 30 days ago.?
It has problem to link at gateway, in especial qnlink process.
The qnLink says that gateway not found in gwy listt.? But the gateway exists in gwy.txt.

de DS5HVM

qnlink2020_05_09.mp4
qnlink2020_05_09.mp4

 

You can see the video file at 49sec as follow?as linking to xrf071c after linked ref082c.


May 09 07:41:19 raspberrypi qnlink[385]: sending File:[/usr/local/etc/unlinked.dat], mod:[B], RADIO_ID=[UNLINKED??????????? ]
May 09 07:41:28 raspberrypi qnlink[385]: START from local g2: streamID=95e7, flags=00:00:00, my=DS5HVM? /QNET, ur=XRF071CL, rpt1=DS5HVM B, rpt2=DS5HVM G, 56 bytes on gate2link
May 09 07:41:28 raspberrypi qnlink[385]: XRF071?? not found in gwy list
May 09 07:41:29 raspberrypi qnlink[385]: Unlinked from [XRF071? ] mod C, TIMEOUT...
May 09 07:41:29 raspberrypi qnlink[385]: Unknown socket family: 0
May 09 07:41:29 raspberrypi qnlink[385]: from_mod
May 09 07:41:29 raspberrypi qnlink[385]:? invalid
May 09 07:41:29 raspberrypi qnlink[385]: END from local g2: streamID=95e7, 27 bytes
May 09 07:41:30 raspberrypi qnlink[385]: sending ACK+text, mod:[B], RADIO_ID=[TRYING??? XRF071? C ]
May 09 07:41:30 raspberrypi qnlink[385]: Unlinked from [XRF071? ] mod C, TIMEOUT...
May 09 07:41:30 raspberrypi qnlink[385]: Unknown socket family: 0
May 09 07:41:30 raspberrypi qnlink[385]: from_mod
May 09 07:41:30 raspberrypi qnlink[385]:? invalid
May 09 07:41:31 raspberrypi qnlink[385]: Unlinked from [XRF071? ] mod C, TIMEOUT...
May 09 07:41:31 raspberrypi qnlink[385]: Unknown socket family: 0
May 09 07:41:31 raspberrypi qnlink[385]: from_mod
May 09 07:41:31 raspberrypi qnlink[385]:? invalid



--------- ?? ?? ---------

????: Tom Early <n7tae@...>
????: <[email protected]>
??: 20.05.09 06:12 GMT +0900
??: Re: [QnetGateway] Qnlink has some problems

The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway to load the gwys.txt file again.

From your screenshot, it looks like your linking to REF030 C okay.



--
Hi everyone,

Thank you in advance.

I have installed the QnetGateway for MMDVM Board, it works very well.
Today I am installing new QnetGateway which is updated in 30 days ago.?
It has problem to link at gateway, in especial qnlink process.
The qnLink says that gateway not found in gwy listt.? But the gateway exists in gwy.txt.

de DS5HVM

qnlink2020_05_09.mp4
qnlink2020_05_09.mp4

 

Hi Tom,


Today you update at?1 hour? ago.

The attatched file is after booting. the qnlink do not to link ref082c setting in qnconfig

The problem is still



--------- ?? ?? ---------

????: Tom Early <n7tae@...>
????: <[email protected]>
??: 20.05.09 06:12 GMT +0900
??: Re: [QnetGateway] Qnlink has some problems

The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway to load the gwys.txt file again.

From your screenshot, it looks like your linking to REF030 C okay.



--
Hi everyone,

Thank you in advance.

I have installed the QnetGateway for MMDVM Board, it works very well.
Today I am installing new QnetGateway which is updated in 30 days ago.?
It has problem to link at gateway, in especial qnlink process.
The qnLink says that gateway not found in gwy listt.? But the gateway exists in gwy.txt.

de DS5HVM

qnlink2020_05_09.mp4
qnlink2020_05_09.mp4

 

If you are absolutely sure XRF082 is in your gwys.txt file, then try this:

Send "?????? F" to your system. After link sees that URCALL, you should see a message in the qnlink log telling you how many gateways were loaded into the database.
Then try to link to XRF082C.
 

Yes, it is correct the gateway file is gwys.txt installed /usr/loca/etc.
But, qnLink shows the gateway not found in gwy list when reflector changing failed.
--
Hi everyone,

Thank you in advance.

I have installed the QnetGateway for MMDVM Board, it works very well.
Today I am installing new QnetGateway which is updated in 30 days ago.?
It has problem to link at gateway, in especial qnlink process.
The qnLink says that gateway not found in gwy listt.? But the gateway exists in gwy.txt.

de DS5HVM
 

xrf071 should have an IP address of 211.60.41.185. If it does not, fix it. I just linked to xrf071c successfully.

1 - 12 of 12