|
Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
|
It's possible for repeater owners to lock down their repeaters
for linking to and may want you to link to reflectors only.
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan Jr.
wrote:
toggle quoted message
Show quoted text
Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I
tried linking to the Papa System repeater and repeater on the
dstar list on my radio but was not able to link. Please advice.
|
The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking directly to it. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Will
Sent: Wednesday, September 19, 2018 00:21
To: [email protected]
Subject: Re: [QnetGateway] Linking Repeater to another repeater? It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. ? Will / W4WWM On 9/18/2018 10:54 PM, Nomis Bayan Jr. wrote: Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
|
Hi Colby,
How do I add repeater on the host files? I was a member of the
PAPA System and we were instructed and informed that after you
link their repeater to the reflector or other repeater that you
are responsible to unlink them, so I was thinking their system is
open. I will ask them on the next meeting. Thank you.
On 9/19/2018 4:35 AM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
The problem
is likely the repeater is not in your host files. Repeaters
generally are not, only reflectors. It could also be, as
Will stated, that the repeater owner is disallowing users
linking directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down their
repeaters for linking to and may want you to link to
reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan Jr.
wrote:
Hi Colby,
I have no problem linking to another reflector, like REFxxx,
but I tried linking to the Papa System repeater and repeater
on the dstar list on my radio but was not able to link.
Please advice.
|
Hi Will,
Thank you. I will try other repeaters. I just wanted to make that
it is working.
On 9/18/2018 9:20 PM, Will wrote:
toggle quoted message
Show quoted text
It's possible for repeater owners to lock down their repeaters
for linking to and may want you to link to reflectors only.
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan
Jr. wrote:
Hi Colby,
I have no problem linking to another reflector, like REFxxx, but
I tried linking to the Papa System repeater and repeater on the
dstar list on my radio but was not able to link. Please advice.
|
Hi Colby,
I set my ID-51 to transmit to the repeater, the repeater is link
to the XRF reflector and my hot spot will display that I am
transmitting, but when I use my new mobile same set up, the
repeater will response but it will not go thru the XRF link.?
Please advice.
On 9/19/2018 7:01 AM, Nomis Bayan Jr.
wrote:
toggle quoted message
Show quoted text
Hi Colby,
How do I add repeater on the host files? I was a member of the
PAPA System and we were instructed and informed that after you
link their repeater to the reflector or other repeater that you
are responsible to unlink them, so I was thinking their system
is open. I will ask them on the next meeting. Thank you.
On 9/19/2018 4:35 AM, Colby Ross
W1BSB wrote:
The
problem is likely the repeater is not in your host files.
Repeaters generally are not, only reflectors. It could
also be, as Will stated, that the repeater owner is
disallowing users linking directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down their
repeaters for linking to and may want you to link to
reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan Jr.
wrote:
Hi Colby,
I have no problem linking to another reflector, like
REFxxx, but I tried linking to the Papa System repeater
and repeater on the dstar list on my radio but was not
able to link. Please advice.
|
Make sure you’re using the correct CQCQCQ. In order to pass the reflector, you’ll have to either program the radio with a Your call of CQCQCQ, or go into the menu and select the Use Reflector CQCQCQ. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Friday, September 21, 2018 18:01
To: [email protected]
Subject: Re: [QnetGateway] Linking Repeater to another repeater? Hi Colby, I set my ID-51 to transmit to the repeater, the repeater is link to the XRF reflector and my hot spot will display that I am transmitting, but when I use my new mobile same set up, the repeater will response but it will not go thru the XRF link.? Please advice. ? On 9/19/2018 7:01 AM, Nomis Bayan Jr. wrote: Hi Colby, How do I add repeater on the host files? I was a member of the PAPA System and we were instructed and informed that after you link their repeater to the reflector or other repeater that you are responsible to unlink them, so I was thinking their system is open. I will ask them on the next meeting. Thank you. ? On 9/19/2018 4:35 AM, Colby Ross W1BSB wrote: The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking directly to it. ? Colby ? ? ? It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. ? Will / W4WWM On 9/18/2018 10:54 PM, Nomis Bayan Jr. wrote: Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
?
?
|
HI Colby,
Thank you. I found out the problem. Everytime I program the ID-4100,
MY Callsign is being erase and that was the reason I could get into
my hotspot and gateway.? How do I update the repeater's host file on
the Qnetgateway. Our group is asking me if we could link to another
repeater.
On 9/21/2018 7:53 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
Make sure
you’re using the correct CQCQCQ. In order to pass the
reflector, you’ll have to either program the radio with a
Your call of CQCQCQ, or go into the menu and select the Use
Reflector CQCQCQ.
?
Colby
?
?
?
Hi Colby,
I set my ID-51 to transmit to the repeater, the repeater is
link to the XRF reflector and my hot spot will display that I
am transmitting, but when I use my new mobile same set up, the
repeater will response but it will not go thru the XRF link.?
Please advice.
?
On 9/19/2018 7:01 AM, Nomis Bayan Jr.
wrote:
Hi Colby,
How do I add repeater on the host files? I was a member of
the PAPA System and we were instructed and informed that
after you link their repeater to the reflector or other
repeater that you are responsible to unlink them, so I was
thinking their system is open. I will ask them on the next
meeting. Thank you.
?
On 9/19/2018 4:35 AM, Colby Ross W1BSB
wrote:
The
problem is likely the repeater is not in your host
files. Repeaters generally are not, only reflectors. It
could also be, as Will stated, that the repeater owner
is disallowing users linking directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down their
repeaters for linking to and may want you to link to
reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan
Jr. wrote:
Hi Colby,
I have no problem linking to another reflector, like
REFxxx, but I tried linking to the Papa System repeater
and repeater on the dstar list on my radio but was not
able to link. Please advice.
?
?
|
The file is located in /usr/local/etc/gwys.txt ? Just edit that file. Once the edits are done, do systemctl restart qnlink. ? Personally, I would link the two repeaters to an XRF reflector. If you only wanted a reflector for linking, that would be easy enough to set up, then just link all systems to the same XRF reflector and module. Essentially, that would link the repeaters. I’ve never tested linking one repeater directly to another. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Saturday, September 22, 2018 16:39
To: [email protected]
Subject: Re: [QnetGateway] Linking Repeater to another repeater? HI Colby,
Thank you. I found out the problem. Everytime I program the ID-4100, MY Callsign is being erase and that was the reason I could get into my hotspot and gateway.? How do I update the repeater's host file on the Qnetgateway. Our group is asking me if we could link to another repeater. On 9/21/2018 7:53 PM, Colby Ross W1BSB wrote: Make sure you’re using the correct CQCQCQ. In order to pass the reflector, you’ll have to either program the radio with a Your call of CQCQCQ, or go into the menu and select the Use Reflector CQCQCQ. ? Colby ? ? ? Hi Colby, I set my ID-51 to transmit to the repeater, the repeater is link to the XRF reflector and my hot spot will display that I am transmitting, but when I use my new mobile same set up, the repeater will response but it will not go thru the XRF link.? Please advice. ? On 9/19/2018 7:01 AM, Nomis Bayan Jr. wrote: Hi Colby, How do I add repeater on the host files? I was a member of the PAPA System and we were instructed and informed that after you link their repeater to the reflector or other repeater that you are responsible to unlink them, so I was thinking their system is open. I will ask them on the next meeting. Thank you. ? On 9/19/2018 4:35 AM, Colby Ross W1BSB wrote: The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking directly to it. ? Colby ? ? ? It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. ? Will / W4WWM On 9/18/2018 10:54 PM, Nomis Bayan Jr. wrote: Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
?
?
?
|
HI Colby,
Thank you for the advice. I will relay the information to our
group. I think the reason why our guy could not like the repeater
to the XRF, is because their system is not updated with the XRF
reflectors.
On 9/22/2018 3:46 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
The file is
located in /usr/local/etc/gwys.txt
?
Just edit
that file. Once the edits are done, do systemctl restart
qnlink.
?
Personally,
I would link the two repeaters to an XRF reflector. If you
only wanted a reflector for linking, that would be easy
enough to set up, then just link all systems to the same XRF
reflector and module. Essentially, that would link the
repeaters. I’ve never tested linking one repeater directly
to another.
?
Colby
?
?
?
HI Colby,
Thank you. I found out the problem. Everytime I program the
ID-4100, MY Callsign is being erase and that was the reason I
could get into my hotspot and gateway.? How do I update the
repeater's host file on the Qnetgateway. Our group is asking
me if we could link to another repeater.
On 9/21/2018 7:53 PM, Colby Ross W1BSB
wrote:
Make sure
you’re using the correct CQCQCQ. In order to pass the
reflector, you’ll have to either program the radio with a
Your call of CQCQCQ, or go into the menu and select the
Use Reflector CQCQCQ.
?
Colby
?
?
?
Hi Colby,
I set my ID-51 to transmit to the repeater, the repeater is
link to the XRF reflector and my hot spot will display that
I am transmitting, but when I use my new mobile same set up,
the repeater will response but it will not go thru the XRF
link.? Please advice.
?
On 9/19/2018 7:01 AM, Nomis Bayan Jr.
wrote:
Hi Colby,
How do I add repeater on the host files? I was a member
of the PAPA System and we were instructed and informed
that after you link their repeater to the reflector or
other repeater that you are responsible to unlink them, so
I was thinking their system is open. I will ask them on
the next meeting. Thank you.
?
On 9/19/2018 4:35 AM, Colby Ross
W1BSB wrote:
The
problem is likely the repeater is not in your host
files. Repeaters generally are not, only reflectors.
It could also be, as Will stated, that the repeater
owner is disallowing users linking directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down their
repeaters for linking to and may want you to link to
reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis Bayan
Jr. wrote:
Hi Colby,
I have no problem linking to another reflector, like
REFxxx, but I tried linking to the Papa System
repeater and repeater on the dstar list on my radio
but was not able to link. Please advice.
?
?
?
|
That would make sense. ? In your case, especially if you plan on adding repeaters to the mix, an x-reflector would make the most sense, since you can link multiple repeaters to any module you want. Anything said over one crosses another.? We have our own version of an x-reflector that could be utilized as well. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Saturday, September 22, 2018 20:24
To: [email protected]
Subject: Re: [QnetGateway] Linking Repeater to another repeater? HI Colby, Thank you for the advice. I will relay the information to our group. I think the reason why our guy could not like the repeater to the XRF, is because their system is not updated with the XRF reflectors. ? On 9/22/2018 3:46 PM, Colby Ross W1BSB wrote: The file is located in /usr/local/etc/gwys.txt ? Just edit that file. Once the edits are done, do systemctl restart qnlink. ? Personally, I would link the two repeaters to an XRF reflector. If you only wanted a reflector for linking, that would be easy enough to set up, then just link all systems to the same XRF reflector and module. Essentially, that would link the repeaters. I’ve never tested linking one repeater directly to another. ? Colby ? ? ? HI Colby,
Thank you. I found out the problem. Everytime I program the ID-4100, MY Callsign is being erase and that was the reason I could get into my hotspot and gateway.? How do I update the repeater's host file on the Qnetgateway. Our group is asking me if we could link to another repeater. On 9/21/2018 7:53 PM, Colby Ross W1BSB wrote: Make sure you’re using the correct CQCQCQ. In order to pass the reflector, you’ll have to either program the radio with a Your call of CQCQCQ, or go into the menu and select the Use Reflector CQCQCQ. ? Colby ? ? ? Hi Colby, I set my ID-51 to transmit to the repeater, the repeater is link to the XRF reflector and my hot spot will display that I am transmitting, but when I use my new mobile same set up, the repeater will response but it will not go thru the XRF link.? Please advice. ? On 9/19/2018 7:01 AM, Nomis Bayan Jr. wrote: Hi Colby, How do I add repeater on the host files? I was a member of the PAPA System and we were instructed and informed that after you link their repeater to the reflector or other repeater that you are responsible to unlink them, so I was thinking their system is open. I will ask them on the next meeting. Thank you. ? On 9/19/2018 4:35 AM, Colby Ross W1BSB wrote: The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking directly to it. ? Colby ? ? ? It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. ? Will / W4WWM On 9/18/2018 10:54 PM, Nomis Bayan Jr. wrote: Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
?
?
?
?
|
Hi Colby,
You are right, and it is more efficient to do that. Thanks.
On 9/22/2018 5:27 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
That would
make sense.
?
In your
case, especially if you plan on adding repeaters to the mix,
an x-reflector would make the most sense, since you can link
multiple repeaters to any module you want. Anything said
over one crosses another.? We have our own version of an
x-reflector that could be utilized as well.
?
Colby
?
?
?
HI Colby,
Thank you for the advice. I will relay the information to our
group. I think the reason why our guy could not like the
repeater to the XRF, is because their system is not updated
with the XRF reflectors.
?
On 9/22/2018 3:46 PM, Colby Ross W1BSB
wrote:
The file
is located in /usr/local/etc/gwys.txt
?
Just edit
that file. Once the edits are done, do systemctl restart
qnlink.
?
Personally,
I would link the two repeaters to an XRF reflector. If you
only wanted a reflector for linking, that would be easy
enough to set up, then just link all systems to the same
XRF reflector and module. Essentially, that would link the
repeaters. I’ve never tested linking one repeater directly
to another.
?
Colby
?
?
?
HI Colby,
Thank you. I found out the problem. Everytime I program the
ID-4100, MY Callsign is being erase and that was the reason
I could get into my hotspot and gateway.? How do I update
the repeater's host file on the Qnetgateway. Our group is
asking me if we could link to another repeater.
On 9/21/2018 7:53 PM, Colby Ross W1BSB
wrote:
Make
sure you’re using the correct CQCQCQ. In order to pass
the reflector, you’ll have to either program the radio
with a Your call of CQCQCQ, or go into the menu and
select the Use Reflector CQCQCQ.
?
Colby
?
?
?
Hi Colby,
I set my ID-51 to transmit to the repeater, the repeater
is link to the XRF reflector and my hot spot will display
that I am transmitting, but when I use my new mobile same
set up, the repeater will response but it will not go thru
the XRF link.? Please advice.
?
On 9/19/2018 7:01 AM, Nomis Bayan Jr.
wrote:
Hi Colby,
How do I add repeater on the host files? I was a member
of the PAPA System and we were instructed and informed
that after you link their repeater to the reflector or
other repeater that you are responsible to unlink them,
so I was thinking their system is open. I will ask them
on the next meeting. Thank you.
?
On 9/19/2018 4:35 AM, Colby Ross
W1BSB wrote:
The
problem is likely the repeater is not in your host
files. Repeaters generally are not, only reflectors.
It could also be, as Will stated, that the repeater
owner is disallowing users linking directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down their
repeaters for linking to and may want you to link to
reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis
Bayan Jr. wrote:
Hi Colby,
I have no problem linking to another reflector, like
REFxxx, but I tried linking to the Papa System
repeater and repeater on the dstar list on my radio
but was not able to link. Please advice.
?
?
?
?
|
Keep in mind you could run one that isn’t open to the public either. ?Most reflector software has a whitelist or blacklist function, and I know for sure ours does, so you could open it up to only the repeaters you want to link into it. Wouldn’t take long to set up either. A good option would be a cheap OpenVZ or KVM vps with a static IP running just the reflector software. Tom has a version of xrfd that would fit your needs nicely. Then, the repeaters would only need to add it into their hostfiles. ? ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Saturday, September 22, 2018 22:24
To: [email protected]
Subject: Re: [QnetGateway] Linking Repeater to another repeater? Hi Colby, You are right, and it is more efficient to do that. Thanks. ? On 9/22/2018 5:27 PM, Colby Ross W1BSB wrote: That would make sense. ? In your case, especially if you plan on adding repeaters to the mix, an x-reflector would make the most sense, since you can link multiple repeaters to any module you want. Anything said over one crosses another.? We have our own version of an x-reflector that could be utilized as well. ? Colby ? ? ? HI Colby, Thank you for the advice. I will relay the information to our group. I think the reason why our guy could not like the repeater to the XRF, is because their system is not updated with the XRF reflectors. ? On 9/22/2018 3:46 PM, Colby Ross W1BSB wrote: The file is located in /usr/local/etc/gwys.txt ? Just edit that file. Once the edits are done, do systemctl restart qnlink. ? Personally, I would link the two repeaters to an XRF reflector. If you only wanted a reflector for linking, that would be easy enough to set up, then just link all systems to the same XRF reflector and module. Essentially, that would link the repeaters. I’ve never tested linking one repeater directly to another. ? Colby ? ? ? HI Colby,
Thank you. I found out the problem. Everytime I program the ID-4100, MY Callsign is being erase and that was the reason I could get into my hotspot and gateway.? How do I update the repeater's host file on the Qnetgateway. Our group is asking me if we could link to another repeater. On 9/21/2018 7:53 PM, Colby Ross W1BSB wrote: Make sure you’re using the correct CQCQCQ. In order to pass the reflector, you’ll have to either program the radio with a Your call of CQCQCQ, or go into the menu and select the Use Reflector CQCQCQ. ? Colby ? ? ? Hi Colby, I set my ID-51 to transmit to the repeater, the repeater is link to the XRF reflector and my hot spot will display that I am transmitting, but when I use my new mobile same set up, the repeater will response but it will not go thru the XRF link.? Please advice. ? On 9/19/2018 7:01 AM, Nomis Bayan Jr. wrote: Hi Colby, How do I add repeater on the host files? I was a member of the PAPA System and we were instructed and informed that after you link their repeater to the reflector or other repeater that you are responsible to unlink them, so I was thinking their system is open. I will ask them on the next meeting. Thank you. ? On 9/19/2018 4:35 AM, Colby Ross W1BSB wrote: The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking directly to it. ? Colby ? ? ? It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. ? Will / W4WWM On 9/18/2018 10:54 PM, Nomis Bayan Jr. wrote: Hi Colby,
I have no problem linking to another reflector, like REFxxx, but I tried linking to the Papa System repeater and repeater on the dstar list on my radio but was not able to link. Please advice.
?
?
?
?
?
|
HI Colby,
I have mentioned to our group about the whitelist and blacklist
function and understood the purpose of that function. I will look
into the option you provided. Thank you.
On 9/22/2018 7:26 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
Keep in mind
you could run one that isn’t open to the public either.
?Most reflector software has a whitelist or blacklist
function, and I know for sure ours does, so you could open
it up to only the repeaters you want to link into it.
Wouldn’t take long to set up either. A good option would be
a cheap OpenVZ or KVM vps with a static IP running just the
reflector software. Tom has a version of xrfd that would fit
your needs nicely. Then, the repeaters would only need to
add it into their hostfiles.
?
?
Colby
?
?
?
Hi Colby,
You are right, and it is more efficient to do that. Thanks.
?
On 9/22/2018 5:27 PM, Colby Ross W1BSB
wrote:
That would
make sense.
?
In your
case, especially if you plan on adding repeaters to the
mix, an x-reflector would make the most sense, since you
can link multiple repeaters to any module you want.
Anything said over one crosses another.? We have our own
version of an x-reflector that could be utilized as well.
?
Colby
?
?
?
HI Colby,
Thank you for the advice. I will relay the information to
our group. I think the reason why our guy could not like the
repeater to the XRF, is because their system is not updated
with the XRF reflectors.
?
On 9/22/2018 3:46 PM, Colby Ross W1BSB
wrote:
The file
is located in /usr/local/etc/gwys.txt
?
Just
edit that file. Once the edits are done, do systemctl
restart qnlink.
?
Personally,
I would link the two repeaters to an XRF reflector. If
you only wanted a reflector for linking, that would be
easy enough to set up, then just link all systems to the
same XRF reflector and module. Essentially, that would
link the repeaters. I’ve never tested linking one
repeater directly to another.
?
Colby
?
?
?
HI Colby,
Thank you. I found out the problem. Everytime I program
the ID-4100, MY Callsign is being erase and that was the
reason I could get into my hotspot and gateway.? How do I
update the repeater's host file on the Qnetgateway. Our
group is asking me if we could link to another repeater.
On 9/21/2018 7:53 PM, Colby Ross
W1BSB wrote:
Make
sure you’re using the correct CQCQCQ. In order to pass
the reflector, you’ll have to either program the radio
with a Your call of CQCQCQ, or go into the menu and
select the Use Reflector CQCQCQ.
?
Colby
?
?
?
Hi Colby,
I set my ID-51 to transmit to the repeater, the
repeater is link to the XRF reflector and my hot spot
will display that I am transmitting, but when I use my
new mobile same set up, the repeater will response but
it will not go thru the XRF link.? Please advice.
?
On 9/19/2018 7:01 AM, Nomis Bayan
Jr. wrote:
Hi Colby,
How do I add repeater on the host files? I was a
member of the PAPA System and we were instructed and
informed that after you link their repeater to the
reflector or other repeater that you are responsible
to unlink them, so I was thinking their system is
open. I will ask them on the next meeting. Thank you.
?
On 9/19/2018 4:35 AM, Colby Ross
W1BSB wrote:
The
problem is likely the repeater is not in your host
files. Repeaters generally are not, only
reflectors. It could also be, as Will stated, that
the repeater owner is disallowing users linking
directly to it.
?
Colby
?
?
?
It's possible for repeater owners to lock down
their repeaters for linking to and may want you to
link to reflectors only.
?
Will / W4WWM
On 9/18/2018 10:54 PM, Nomis
Bayan Jr. wrote:
Hi Colby,
I have no problem linking to another reflector,
like REFxxx, but I tried linking to the Papa
System repeater and repeater on the dstar list on
my radio but was not able to link. Please advice.
?
?
?
?
?
|
