开云体育

Justin, From the errors shown in your log, it appears that all of the errors are a result of MMDVMHost and YSFGateway not being able to communicate. Would you be able to post ~/MMDVMHost/MMDVM.qn

Further update: I’ve compiled the Qnet gateway to use the MMDVM as a full duplex hotspot, rx frequency is 439.000 tx is 434.000. I’ve attached some logs if that would help. THanks, Justin

****Update**** I recompiled the Qnet gateway app, choosing the board as a d-star modem, and that appears to work where as using an MMDVM host does not. DO full duplex mmdvm boards behave

FOlks, I’ve just compiled my Qnet gateway build on one of the boards put out by n5boc: aka, Lonestar Semi conductor, and the board is a full duplex board. I uninstalled the configuration, created a

Turns out that "transmit level" is not what I'm after. I'm wanting to set the "RF level". But the RF level setting is not available in the expert modem settings in QnetGateway. The RF level is

Folks, I’ve just changed the hotspot that my Qnet gateway is running on from a Zumspot to a full duplex MMDVM board put out by n5vboc. Yesterday everything worked fine, but last night before I went

I don't see any problems in that config except one small thing. In the Options line where you book your DG-ID's, each one must be followed by as semicolon for the YCS server will book

Can you look at this? I just would like to have some one who is sighted to take a peak at the syntax of the changes that I think I’ve made: ***Code Begin*** [General] Callsign=ai5os #Suffix=RPT

Hello Justin, If you are still wondering, I may be able to help. In several places in YSFGateway.qn, there are configurations for the paths to files necessary for YSFGateway to start and function

All fixed. New Raspberry pi, re-burned memory card? Copied card with Windows disc-imager Burned a 2nd card (backup) all I have to do is record a voice mail message (A net reminder) if I pop in the

The "Voicemail" feature is far as I know a Local only.. Like if both I and my domestic partner (Which I have none of at this time) you put s0 (that's S and a zero) in the UR filel key the mic an

I’ve never tried voicemail. I’m curious, can you try linking to xlx94, and tell me if you can use it at all? Dashboard should be at xlx.txi35hams.com <http://xlx.txi35hams.com/>

No just D-star and that in terminal mode... But I was not even getting to that point For some reason on the "Coolspot" (What I call it) Pi I could not get SSH to work for initial set up.. Pulled the

John, Is your build a multi-protocol build, in other words, can you support d-star, DMr, and whatever else, or do you just use d-star? Just curious.

Problem solved. IT WAS hardware. I reburned the cards (yet again) copied wi-fi Supplicant and ssh to card exactly as before. popped it in a DIFFERENT Raspberry pi-zero.. one card is configured and

I tripped over the box with one or two spare Pi-zero's last night today or tomorrow depending on .. this is a busy weekend... I'll give a try to a brand new pi "Nothing adds excitement like

Yep that is the same issue that I’ve had, working with the wifi builder that is on the pi-star.uk <http://pi-star.uk/> website. I was able to find another pi with an ethernet connection. However,

The router seeds it. both routers see it depending on which wifi_Supplicant I use. But that's as far as it goes. "Nothing adds excitement like something that is none of your business" Note I am not

I am beginning to suspect hardware but will double check the file name I've done it before with 'ssh' as the conts as well as the name but I've tried both ways with this and no joy. Sadly the pi's

Trust me, I can totally relate, becuase I knew I had imaged the thing correctly, and yet it refused to connect to my wifi. I fought for days trying to get this pi working for me… It wasn’t fun