开云体育

I run QNet IcomGateway on a Pi 3 connected to my first gen Icom DStar repeater in Dallas GA.? QNet connects to my XLX reflector; which is on Digital Ocean.? Works very well. Look me up on QRZ if

Yes....... Pursuing this with the blessings of the repeater admin. The repeater is running Icom software and does not allow linking to a non "US Trust" reflector. Just looking for something that I can

Traditionally the repeater would make the connection to the reflector via an internal command or via RF by a user. The reflector does not generate an outbound connection request to a D-STAR

First off, thanks for developing such a useful ham radio program. Let me say that I am by no means an expert of doing things like what I have been trying to do, so I apologize if this is an elementary

I've got QnetGateway work well on Raspberry Pi Zero 2W, and a MMDVM HS hat. Everything is ok but the OLED on MMDVM hat doesn't work. The OLED goes well with Pi-Star 2.1.8. Followed every step of

If you want dual stack operation, make sure that in the IRCDDB qnconfig submenu, ha is set to ircv6.openquad.net and hb is ircv4.openquad.net. See lines 80 - 83 of the CONFIG+INSTALL file.

I don't see any binds to port 40000. Where are you getting that info?

Thanks Tom! I actually went through starting at 50 working up to 56 sequentially last night, but never thought to try removing up to 57. I admittedly am not very knowledgeable on the AMBE format but

Sorry Carter, quite some time ago, I changed the format of the header block in the recorded voicemail. I think you need to strip off the first 57 bytes file to generate your .dat file, not the first

Hey guys, just recently got a club repeater stack on the air with QNet for the first time instead of G2/G3. So far it has been smooth sailing. but I am setting up some voice announcement scripts, and

I have used the red UHF DVAP dongle on DSTAR ?since about 2010 ! and now in 2024, the RF seems to be flaky. After a while, maybe several minutes ... TOOL shows the network traffic properly, but no RF

My Raspberry Pi OS Lite Bookworm, based on Debian 12.4 works fine, so I'm a bit perplexed. My pi is reporting the g++ version of 12.2.0. What version is your system at (do g++ --version). You can try

Hi Everyone, I'm trying to build the QnetGateway on a Debian 12 system, but it keeps failing. Any suggestions on how to fix this? I was able to get it to work on CentOS, but much prefer Debian if

Thanks for letting me join. I am sure I will have lots of questions later. I still trying to figure out this whole D-Star thing. I just purchased a ID4100A new in the box and unopened. I bought the

The DVAP works well with QNET gateway, mine has been running for a few years without a glitch, the same gateway also has a zumspot running, so I have VHF and UHF on the same hotspot. Now, running any

I have not tried to use QnetGateway with a DVAP, simply because I do not have one. I can tell you that the bigger issue would be using something like a DVAP with a gain antenna at high elevation

Hi everyone. Just joined the group. Wonder if anyone is using the DVAP VHF Dongle (the red one) with the QnetGateway? Looking at buying one as a base for a VHF higher powered, high

Looking forward to a V2, looking at his Peanut site now, looks interesting.? on a positive note the repeater was deployed today and so far working well with QnetGateway

Thanks that worked like a charm, guess I should have looked closer to the config page as I was enabling it :-)

Oh wow, that responsive dashboard is still in use. That's good to know. I first created that dashboard as part of a project I was doing for a graduate level User Experience course I did as part of my