开云体育

Hello, I have two DVAP's (DV Access Point Donge's) running on two separate PC's.....Windows 8.1 and Windows 10.... On the Windows 10 PC, the DVAPTool 1.05 runs and operates fine except for the

Sorry for the long response time. It would be a lot of work to expand the number of modules in QnetGateway. It's pretty much hard coded into the gateway and the link program. I am considering a big

If all you were doing is changing a value in any config file, including MMDVM.qn, you don't need to do a "git pull" or even recompile. You just need to "us" and "is". In the offending directory, do a

Hi there, I'm trying to rebuild Qnet gateway, because the mmdvm.qn file didn't have the right parameters to access the modem on my hotspot. I uninstalled the currently configured syste with us,

Thanks, Tom. If there is anything I can do let me know. That includes giving you access to my gateway. Dan

Sorry. For several months now, my programming time has been used up on another big project. I'm sure there are loads of problems with the mega branch. I'll be working on this in a few days.

I rebuilt and started th mega branch of QnetIcomGateway today, and it's working.? But, I'm not sure I don't have problems. I'm going to leave it running for a while to see how things go.? First

This is a very low-priority wish. As I mentioned, I have four Raspberry Pi hotspots. I decided to run three on QnetGateway and one on DOH. So all is good.

Alas, I rolled back to the version of QnetIcomGateway I was running before.? The new version was starting up ok. I was getting a message that I was linked to the reflector.? But, I didn't seem to be

I think QnetGateway currently allows for three D-Star modules... A,? B, and C. What are the chances of getting more? I have four hotspots at home. Currently no way to run QnetGateway on all of them

I think I answered my question!? Copied qndash.service from QnetGateway, and all is well.? Dashboard is running and at least gives us the ability to see what's going on and send UR commands.? To be

A year and a half later, and I'm FINALLY giving this a try!? ? And, I'm not even a wanna-be with git, but trying...! I did this... cd cd QnetIcomGateway sudo ./qnadmin (remove working system and

Because you system is screwed up now, I suspect you did a "gp" in the ./qnadmin main menu sometime recently, so you should have it already. MMDVM.ini in the MMDVMHost build folder. If you would have

That amkes total sense. This is probably a silly question, and the only justification that I have is that I’ve been traveling a bit, so I need to undo my Qnet gateway cobbwebs. where can I find

Looks like the modem device string is empty. Things have changed in MMDVMHost recently (importantly, SerialController.* is now UARTController.*) so some variables defined in MMDVM.ini have new names.

Here is what the logs say: Last login: Thu Oct 21 07:00:59 on ttys000 justinmann@Justins-iMac ~ % justinmann@Justins-iMac ~ % ssh pi@... pi@...'s password: Linux ai5os-gw

Whoops, sorry. Because it's not running ./qnadmin log menu won't offer it. You'll have to run it manually: sudo journalctl -u mmdvm -f

So when I try to use the log menu, I see that mmdvm has not started, and I’m not seeing any ind of logs provided. I have my th-d74 running, and occasionally I can hear some kind of a blip on the

Look in the mmdvm.service log. You can use the log sub-menu of ./qnadmin to do that, or, if you prefer use journalctl (you need to be root).

Folks, I’musing one of the n5voc boards, and I’m doing a re-install of the Qnet gateway software. I uninstalled the system using us, cleaned the executables from the main menu of qnconfig, and