开云体育

Nothing is working right. I am done for tonight. I think I might spin up a separate vm for this. Then link dstarrepeater to it. I will try tomorrow.

You're getting a lot of nonsense errors because things aren't starting properly. If you don't "make installbase", the all-important defaults file won't be where it's suppose to be and things will go

Please do the following: sudo grep qndvap /var/log/syslog It’ll be big, but it’ll show more. Try to capture a couple of iterations of the program starting and stopping. Colby

Yes, did all that.[image: Ashampoo_Snap_2021.03.23_14h50m15s_001_.jpg] Here is the log.. doesn't really show any causes.

Horst You re-ran qnconfig and set the serial number, yes? It should be in the format Tom indicated, AP123456. I believe its case sensitive as well. If you’ve done that, run an uninstall, and

You have to reset the defaults file back to its “default” state which reverts the mods you made to it. Then use qnconfig expert to make your qn.cfg file. You’re replacing mmdvmhost with

Thank you Tom Found the serial number, it is actually printed on the casing and it was obscured by a bit of velcro... duh...however, it still does not work. It just says the module is not running and

Here is what expert gave me: # Created on Mon Mar 22 23:04:57 EDT

Whatever you changed, you are still missing some crucial stuff that all the pieces need to start and talk to each other. I would suggest setting up qn.cfg for mmdvmhost and changing the parameters

Changed the parameters cause I am not running MMDVMHost. It is reading the packets. I just executed a command.

Did you run qnconfig and configure a module as “MMDVMHost”? Or did you change parameters in the defaults file? Sent: Monday, March 22, 2021 22:42 To: [email protected] Subject: Re:

Okay, So I have a few issues. One I don't think MMDVMHost is the same as DStarrepeater. Unless I have something set wrong. Restarting 'gate2link'... Inactivity from local rptr module B, removing

The serial number for my old red 2M DVAP is on a white sticker on the bottom-side of the PCB next to the USB socket, visible through the translucent case. In any event if you can't find your serial

I have been trying to use my old DVAP dongle and the configuration asks for a serial number that is supposed to be visible on the PCB. It is not, I can see a serial number for the port when I connect

Many of these stations, like F4FXL are not logged into ircv4.openquad.net, therefore they will not be findable, but if you are successfully logged into ircv4.openquad.net, you should be able to find,

Your logs you posted indicate your smart group server is still connecting to rr.openquad.net.

Yes it was a typo. I do have everything on ircv4. Maybe I change my pi-star to qnetgateway. Then I can change the repeater. but yes I can getting those errors on ircv4.openquad.net

rr.openquad.net is a dummy server, left in place to satisfy nearly 8000 PiStar users that never do DStar routing. It will not respond with any Find command. Use ircv4.openquad.net. It works. Also, I

M: 2021-03-21 17:41:29: USER: F4FXL??? NOT FOUND M: 2021-03-21 17:41:43: USER: F5IHZ??? NOT FOUND M: 2021-03-21 17:41:48: USER: BU2FA??? NOT FOUND M: 2021-03-21 17:41:59: USER: F4FXL???

Thanks for the information. I will look in to that. I am pretty good at bash. I wrote most of my weather alerts. and all my ping software for the repeater. Here is my issue this now. I have it