开云体育

Thanks, the scripting capability is an often overlooked and a powerful feature of QnetGateway. Along with qnremote, it gives the administrator unprecedented control over a repeater

Hi Ryan, You may want to look at "Smart Groups" in Qnetgateway which is a newer implementation of the Starnet model. John -- John D. Hays Kingston, WA K7VE / WRJT-215

Greetings, I am looking to switch to this format. I really like you can execute 36 commands. This will really help me out as a repeater owner. I run a lot of commands from the keyboard that would be

Hi Will, Thank you, I just need guidance in this process. I will download the QnetGateway to the raspberry pi where the STM32 is install. Thanks.

Hello Nomis, The STM32 modem also support MMDVM software, so you should be able to use it with QnetGateway in Dstar mode. Will / W4WWM

Hi Nomis, Qnetgateway supports Icom radios with ITAP support (these radios use Icom's OPC-2350-LU USB/Serial cable), DV Dongles, V#1 of the DVRPTR board and any device supported by MMDVM, including

Can I use QnetGateway for the MTR2000 Repeater with STM32 converted to D-Star? Where can I get if exist some resources. Thank you.

Thanks had to turn on the dplus support no problem linking to the repeaters in abq now I did have to add the W5MPZ repeater restarted the link and right in thanks working good

Legacy systems only support REF linking on port 20001. Be aware that some repeater owners will block incoming link requests. If you're have problems linking, make sure the IP address is correct first,

When I add repeaters to the gwys.txt say like the W5MPZ repeater in ABQ what port do I use this is us trust gateway 2nd do I have to recompile ./qnadmin again ? Elmer [W5SLG]

I

You can checkout an earlier revision. Go in the commit history and find the commit hash to one that worked, and do git checkout <hash>. When he’s fixed all the issues, do git checkout master to

Well after two failed attempts of getting the OLED working something has changed in MMDVM doesn't seem to want to work anymore MMDVM has pushed a lot of updates and getting errors when compiling and

Your dmr.cfg file looks okay to me. This morning we moved the irc servers. It's a long story why we did that, but there is an announcement on our "Whats New" webpage. Anyway, the new server hostnames

Tom, I am on a debugging kick this morning. Two oddities I am noticing are under voltage thunderbolt appears occasionally, and I always see a “Failed opening QnetGateway failed. I will send you

This is the procedure i followed last time to get my MMDVM to work with my OLED and it has worked fine but since I did the get pull refresh something has gotten broken but this is what i did i just

The following announcement was just released on the QuadNet website:

No, you need to edit the file /boot/config.txt So, nano /boot/config.txt, go to the bottom of the file and add it there. Colby Sent: Thursday, February 18, 2021 12:27 PM To:

Where do I add that.. bashrc ? "Nothing adds excitement like something that is none of your business" Note I am not a doctor, I don't even play one on television John F Davis

You need to add dtoverlay=miniuart-bt or dtoverlay=disable-bt in /boot/config.txt at the bottom and restart the pi or else the built in Bluetooth will attach to the high speed UART on the GPIO header