开云体育

The gateway file is gwys.txt, not gwy.txt. If you updated the gwys.txt file while qnlink was running, it won't automatically read the modified file. You need to send an "?????? F" to the gateway

Hi everyone, Thank you in advance. I have installed the QnetGateway and it has worked very well. Today I am installing new QnetGateway which is updated within 30 days ago. But It has problems in

https://youtu.be/OxsmGaFZ2MM how to get multiple public IP addresses into your station.

Not if you want routing to work, since you can only forward UDP Port 40000 to one system. This really shouldn’t happen in the wild. I would suggest using a VPN or something for the second system so

Reading the mail, I think I understand that for QnetGateway works with homebrew repeaters and hot spots.? For Icom "stacks" you need QnetICOMGateway. Can both gateway programs co-exist behind a

Yep always have Elmer [W5SLG]

When you are using Smart Groups like DSTAR1.. your "TO" field should show DSTAR1.. you do not go back to "Use Reflector" because you are NOT using a reflector. Thus till you decide to "Terminate"

Great stuff! Love your work Tom. Cheers David ZL2YZ Sent: Thursday, 16 April 2020 06:44 a.m. To: [email protected] Subject: Re: [QnetGateway] DSTAR2 and DSTAR1 By default, the

If you subscribe to the Quadnet D-Star users Facebooks groups I post most of information there . But here is the link I used to build the

I have the D-74a and I used to see it on Pi-star but not seen the login message just the tone acknowledgment Sent: Wednesday, April 15, 2020 1:44 PM To: [email protected] Subject: Re:

Hi Elmer, If you haven’t already, could you share the process for getting your OLED working? Not only am I sure that I will be wanting to do that someday, but I am sure that others will too. Many

By default, the acknowledgement that you see on each key up is from qnlink. It's just reminding you that you are not linked. Just as a quick reminder, when you are linked, there is a state maintained

Ahhh but it would help to include something to let you know your logged into the smart groups just saying Elmer [W5SLG]

Routing is not linking. =) Colby Sent: Wednesday, April 15, 2020 13:47 To: [email protected] Subject: Re: [QnetGateway] DSTAR2 and DSTAR1 I also noticed that when logged into the

I also noticed that when logged into the smartgroups that is does not show you linked into anything so it kind of throws you a curve

OK I got it now, Thanks Big and I finally got the 1.3 OLED working on the zumspot

When you get not in cache, key up again. Nothing is in the cache when a hotspot or repeater first boots up. After the first not in cache, it should add the required information to the local cache

When I try to connect to the smartgroups on DSTAR1 or DSTAR2 or some local repeaters I am getting not in cache message, Any help would be appreicated

Sorry Dan, we're on completely different tracks... You should be able to use a digital-to-USB cable which essentially turns your 9700 into either the equivalent of a DVDongle (Terminal Mode) or a

Thanks for your thoughts Tom. So if there was a translator that could take the G3 routing calls that go over the LAN connection and turn them into something that looks like it came from mmdvmhost (or