开云体育

I did a git pull today to see if there were any updates. Foolish, I know.? Anyway, it now fails to compile and install. I use ./qnadmin to compile and it clears the screen so I don't have much to go

The 2820 call sign menu has YOUR=CQCQCQ, RPT1=N0KBL ?C, RPT2=N0KBL ?G, MY= N0KBL ? ?/2820 and it's in simplex mode, no DUP+ or DUP-. I'll give it a try with my ID-51. I think I'll have to get the

Ah, okay. Those "DIRECT" on rpt1 and rpt2 on your 2820 means you using "Local CQ" in your *To* field. You should be using the Repeater->Use Repeater CQCQCQ on your 2820. And you need to make sure that

I forgot to include some some traffic in the log: Mar 20 17:19:25 raspberrypi systemd[1]: Started QnetDVAP. Mar 20 17:19:25 raspberrypi qndvap[29907]: QnetDVAP-20307 Mar 20 17:19:25 raspberrypi

qndvap log: Mar 20 17:19:25 raspberrypi systemd[1]: Started QnetDVAP. Mar 20 17:19:25 raspberrypi qndvap[29907]: QnetDVAP-20307 Mar 20 17:19:25 raspberrypi qndvap[29907]: Reading file

There are several problems showing up in your logs besides the missing r2. It looks like qndvap isn't supplying a reliable header packet. It would be nice to see its log, especially during

I'm setting up QNetGateway on a pi with a dvap. ?I get the Welcome to QuadNet greeting when the gateway starts up, I can link and unlink with qnremote just fine, and I can unlink with my IC-2820, but

Thanks, Tom.? I plan to try your suggestions out in the next few days.? I'll let you know what I find... 73 Keith/KI5US

I suspected this might be true, so I read the journalctl man page. You can specify just exactly what you want to watch. Try: *sudo journalctl -u qngateway -u qnlink -u qnistack -f*

Hi Keith (and Ryan), If your link fails and the module's auto_link is on (the default value for auto_link is on), it will try to re-establish the link about every 50 seconds. If it fails, it will let

I have been encountering the exact same behavior, but not all the time. My experience has also been that actual voice traffic over the repeater or to and from a connected reflector appears to work

Tom Thanks very much for your efforts to provide a viable alternative to G3.? I'm new to managing a D-Star gateway, so I'm bound to ask some dumb questions, but here goes... We've installed your

Thanks Dan! Not a dumb question at all. The reflector and gateway suffixes are reversed on an Icom repeater depending on whether the stream is going into the repeater or out of the repeater. I

I thought I posted a dumb question about the position of the "B" and "G" in Ryan's logs.? If it ever shows up, it wasn't me!? Some dummy wrote it! I pulled the latest code and did a successful echo

Sorry this is taking so long, Ryan. I have pushed up a new version. Some weird things I don't understand. See the comments below: These b values are the problem. I don't understand why I didn't catch

As Tom noted, I have been doing a good bit of testing the new IcomGateway repo, but I have yet to get it working properly. The hardware is an ID-RP4000V and an ID-RP2C.? Everything works exactly as

Tom, Thank you BIG TIME...I KNOW Dan W4DTO was a huge help. A lot of us here are really working the system on WX4PCA C using all the functions. So far looks and is working FANTASTIC. We are

Thanks to a couple of hams from 4-land, there is a new IRC gateway especially for Icom repeaters. Ryan W4EAE helped me start the debugging process and Dan W4DTO helped me finish it. Dan provided key

Thanks for letting me know. I should probably remove that option if he's not keeping it up. Legacy REF reflectors are suppose to be automatically downloaded from the auth.dstargateway.org round-robin

I see the full reflector list is downloaded from va3uv.com. It appears to be several years old and there are new reflectors and some IP addresses have changed. I tried to find a contact email for