开云体育

Colby... last night I was playing with some of the other smart groups listed on the quadnet web site. When I tried ILLINK... I received the "not in cache" message. While I did try several more

That's really interesting. The ackTimer is used to detect when the Icom firmware is locked up and needs to be reset. The ackTimer is only about moving packets from the internet to the radio. If you

I was suspecting that card myself.. Colby is sending me info on a better card and I'll switch to it Wed or Thu (next shoppign trip) Oh the fun. First time for either of us using Team Viewer on a

John is all set. It appeared to be some file corruption likely caused by a faulty SD card. His qnitap is working flawlessly now. Colby Sent: Sunday, May 17, 2020 07:08 To:

Tried blowing it away (rm QnetGateway -f -r) ad redoijg the git command... Now I have a qnitap file but.. alas. still not working. "Nothing adds excitement like something that is none of your

Hi Everyone; After some troubleshooting I got it working, I had to change some code in QnetITAP.cpp; line 364. (although that may not be accurate as I was doing some other edits in the file during

I think you found it when I did the ls -l /lib/systemd/system/qnitap* "File not found" (well that's a simplified version) "Nothing adds excitement like something that is none of your business" Note I

Thank you both Tom and Stephan for replying with your suggestions. I cannot reproduce the echo test that you have shown Stephen. I was, until a few hours ago, certain there must be a defect with my

Systemd is not even starting qnitap. This looks like the /lib/systemd/system/qnitap.service file is foobared. I sure would like to know how that happened. Make sure there is only one file listed with

Ok Here is the last quote a bit of the file. (entire file after a restart) Oh and for a period it told me ITAP not installed so I did an IS then a US and got the ITAP installed again but.... (I

Sorry guys, I'm working on too many thinks at once! I think I have fixed the trouble with the web page finally. Do a "git pull" to get a new index.php file. John, you need to take a look at the

Ok the error is in the modules seciton and I'm having an issue with the ITAP module.. bu totherwise it seems to be working Now Module A (ITAP) is stopped. i go to Maintenance menu and re-start it. and

515? I just did another GP and it did not pull any .cpp or .h files so we will see. Still getting the Uncaught Exception unable to pen database error. Have clue about the SQLte3 database will

Sorry John. Robert also found an error with qnconfig. Both are fixed. Since these are not C++ files, you just need to do a "git pull" to patch you system, but only if you are running 515. If "git

Well.. Since you pushed an upadat I did the IS-GP-US bit and QnetGateway WA8YXM Dashboard System Info: CPU Kernel OS Hostname Raspberry Pi Zero W Rev 1.1 temp=48.7°C 4.19.75+ armv6l GNU/Linux

Thanks Al, I pushed up a fix for that. Tom N7TAE

Thanks, Tom. Just a heads-up: I had to delete my existing sqlite3 database (after uninstall/"us", before install/"is"), to get Last Heard stations to appear in the dashboard. Other than that, the

Hi Rob, I just did a quick test by myself: * ID-4100DH was set to 145.350 MHz Simplex + Accesspoint-Mode * QNetGateway, version from 12th MAy 2020, linked to DCS003 Z, which is an

Hi Tom; Thanks for the suggestion. Unfortunately this did not change the behaviour. Thinking it must be another setting on one of the radios I actually just did a factory reset on both the radios

Make sure your the offset is zero on your 4100. You'll have to get out of AP mode because you can't set the offset while in that modem. After you return to normal mode, you shouldn't be in DR mode,