FOlks,
I¡¯ve had a heck of a time trying to get a version of Raspberry PI OS to successfully image to an SD card, or should I say boot and connect to my wifi. I¡¯ve created a wpa_supplicant.conf file, used touch to make a ssh file that I moved over to the boot partission of the SD card, and have done the necessary edits to enable the serial port, and disable bluetooth. For whatever reason, there is something just acting weird with my attempt to install Raspberry Pi OS on this Pi 0W that I can¡¯t quite work out, so¡
I¡¯ve done a little experimenting, and have been able to successfully ssh in to my Pi when I have my card that I use for Pi-star installed, and I was successfully able to get qnet installed, and have started to try and run the ./qnetconfig script. When you are in the menus, and you are presented with the various modules, in my case I chose b, as I¡¯m running an mmdvm hotspot, how do you move one choice to the next, so I know that I do need to go in to the IRCDDB menu, i, and login, l,once I¡¯ve pressed the letter l to enter my callsign, do I then press enter, and then enter the desired values, followed by enter again when I¡¯m finished?
Finally, is there a way that I can tel Pi-star not to load, but allow the Raspian OS to load so that I can use Qnet? I¡¯m assuming that having both running on a hotspot probably causes problems.
Thanks for the help folks,
Justin
