Hi John,

Thank you for your response. I maybe slow in understanding what you have provided. Using the RPi 3 USB, I may add a network device for the second NIC, for example TP link. Now I have two ethernet connections, one should be connected to the router and the other will be connected to the IRP2C controller.

1. I plan to use the Fixed IP address I purchased from AT&T, assigned it to the gateway or RPi 3. The same set up for my XLX server, I do not have to open any port forwarding. This should be okay?

On 8/29/2018 4:15 PM, John D Hays - K7VE wrote:

You can use one NIC or add a second using a USB to Ethernet.? Your configuration may need to change.

Standard Icom G2/G3 install is the RP2C is at 172.16.0.1 and the gateway computer is at 172.16.0.20 with connection to the router on 10.x.x.x/8? ?() using a second NIC.

If you put your Pi and Router on (Pi at 172.15.0.20 and router at 172.16.0.254 for example) then you can use one NIC.

On Wed, Aug 29, 2018 at 2:51 PM Nomis Bayan Jr. <nolyn78@...> wrote:

Can I use the Raspberry Pi 3 for the gateway on Dstar ID-RP2C Controller. It seems that I needed two NICs cards, PI star has only one.

N0MIS

--

---

John D. Hays
Edmonds, WA

K7VE

???