Re: Raspberry Pi 3
|
Colby Ross W1BSB
¿ªÔÆÌåÓýYou can also program in a different IP address range on the repeater controller. This is how I did it when we were testing QnetGateway¡¯s ICOM stack. I moved the repeater to 10.0.0.4 and the gateway to 10.0.0.5 and adjusted the configuration file for QnetGateway to reflect the changes.? In fact, all of the ICOM stack testing and bug fixing was performed on a single NIC Raspberry Pi 3. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of John D Hays - K7VE ? You can use one NIC or add a second using a USB to Ethernet.? Your configuration may need to change. ? Standard Icom G2/G3 install is the RP2C is at 172.16.0.1 and the gateway computer is at 172.16.0.20 with connection to the router on 10.x.x.x/8? ?() using a second NIC. ? If you put your Pi and Router on (Pi at 172.15.0.20 and router at 172.16.0.254 for example) then you can use one NIC. ? On Wed, Aug 29, 2018 at 2:51 PM Nomis Bayan Jr. <nolyn78@...> wrote:
? -- ? John D. Hays K7VE ?
? |
?