Re: QnetGateway - Icom Repeater, Linking from the Hotspot to the repeater
|
Thank you.
On 9/15/2018 9:46 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
The IP you
gave me is the IP they¡¯re going to have to use to link to
your repeater, unless ATT or your internet provider lets you
use your unused static on that device, in which case, you
could provide THAT address once its up and running.
?
?
?
Currently I am using one of? the dedicated IP address, I
purchased from AT&T for the XLX server and it is working
fine. Would it be problem if I provide this global IP address
to other people?
?
On 9/15/2018 9:36 PM, Colby Ross W1BSB
wrote:
You¡¯d have
to check with AT&T on that, I¡¯m not sure how that
device works and if they¡¯d allow you to plug one of your
unused addresses in or not.
?
?
?
?
question: Can I assigned an dedicated IP address, since I
still have two that I purchased from AT&T?
?
?
On 9/15/2018 9:33 PM, Colby Ross W1BSB
wrote:
I can
link no problem.
?
Make sure 107.214.250.180
is the IP they are adding to their host file in the
DPlus_Hosts or whatever host file they have to add to, and
if it requires a port, use 20001.
?
?
107.214.250.180
?
On 9/15/2018 9:29 PM, Colby Ross
W1BSB wrote:
On
your gateway machine running the ICOM / QnetGateway
system, type curl ipinfo.io/ip and if it fails and
says curl not found do apt install curl and then curl
ipinfo.io/ip
?
?
?
NOt sure where to get that IP.
?
?
On 9/15/2018 9:25 PM, Colby Ross
W1BSB wrote:
I need the globally routable IP,
your WAN IP
?
Colby
?
?
From: [email protected] <[email protected]>
On Behalf Of Nomis Bayan Jr.
Sent: Sunday, September 16, 2018 00:25
To: [email protected]
Subject: Re: [QnetGateway] QnetGateway - Icom
Repeater, Linking from the Hotspot to the repeater
?
HI Colby,
192.168.1.170
?
?
?
?
|
