开云体育

M99 is a grand-design spiral galaxy in Coma Berenices, sometimes referred to as the Coma Pinwheel. It was one of the first galaxies whose spiral structure could be seen by early astronomers, first

"QSI 500 and 600 series cameras both now obsolete and under no further development". To be expected I suppose. Much of this has been driven by two developments. The arrival of advanced CMOS cameras.

Thanks, I did read up on that. I've contacted both support emails, QSI but not sure if that actually sent and the Atik site in which I received an automated response that they received it.

Bill. Forget about the ASCOM “JustAHub” option I mentioned, at this time it doesn’t support cameras with internal filter wheels so no good for the QSI series 500/600 cameras. You might like to

Jeff. Do not attempt to install or update the FPGA or firmware for your 6162 with Julien’s firmware for his 683, AFAIK you’ll need the specific matching FPGA and firmware for the 6162, for which

Bill. The two QSI camera entries in the ASCOM Camera Chooser drop-down menu, QSI Camera and QSI Camera (2) are otherwise identical in properties, they are provided to allow users who might have two

This is what I have discovered. The Sky X 32 bit has a single driver, which is QSI X2 camera. I tried this out, as I have both the 32 bit and 64 bit TSX programs on the computer. TSX Professional has

I have a 6162 oag 8 using The Sky X. I’ve attempted to use the fast readout for the focus tools in The sky X. I have been able to go into the QSI dialogue setup box and chose the fast readout. I

Hi Julien, do you still have the firmware file for your 683? I'm having issues with my 6162.. Jeff

Thanks for the help Will. I mainly use Voyager. Maxim was just to try to see if Voyager was the issue. I've written to I guess the Atik support and have received automated responses back. I have also

Hi Jeff. From the steps you’ve tried and the description of the problem it points to a camera FPGA or firmware issue and Atik/QSI don’t provide those for your 6162 camera publicly, you’d have to

Hi Will, that is basically what I was doing but I started all over again and followed your directions but no help. I tried the ascom and straight QSI camera ID's . Tonight I used new cable, power

After un-installing the older QSI package you might find that the old ASCOM drivers are not removed. With the camera unplugged, remove all QSI installed packages via the usual Windows Add/Remove

Sorry, grey band on the left.. [email protected]> wrote:

Hi all. I bought the 6162 to replace my 683. Hooked it up and connected right away but the images seemed square even though sensor is 4500x3600. I received the updated ascom and install package from

Greetings group. I need to replace my QSI683 ac adapter. Can anyone suggest the correct adapter. I purchased one suggested by Cloudy Nights but the camera power cord was too short [43 inches long]. I

@Kevin, Geof, and Jerry - thanks for the kind comments.? That target turned out to be a nice surprise to me. Bruce

Another great image, Bruce.? A beautiful grand-design spiral galaxy with great color - a masterpiece.

Thank you so much. It's exactly what I was looking for.

Bruce, What a beautiful galaxy, superbly captured and presented. Geof Sent from Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Saturday, April 5, 2025 4:59:13 PM To: