开云体育

Hi all SSB firmware was released into beta on 17-Mar-2025 after 9+ months of development. Many thanks to everyone who bravely helped test it and patiently provided their feedback and observations. There are now quite a few YouTube videos, forum reports and other social media mentions about on-air successes with QMX SSB. Now that it has been at least 6 weeks in beta and I believe most of the issues have been resolved, it's time to promote it to an official version. I have called this version 1_02_000 and published it on the QMX page http://qrp-labs.com/qmx where I have also published the updated operating manual, which grew from 111 pages to 134 pages. The main changes are: SSB (obviously!) including CESSB, TX Equalization, Mic AGC, VOX, Pre-distortion and and and... Addition of up to two more USB Virtual COM serial ports (up to three total). All of the hardware tests such as RF and SWR sweep, and Diagnostics, are now available on the LCD too. New CAT commands for LCD contents, S-meter, AGC-meter, Power meter, SWR meter, SSB source Complete list (relative to 1_00_027 the previous official version): SSB modes added (USB and LCB), with CESSB, TX Equalization, Mic AGC, VOX, Phase pre-distortion and more Rationalization of menus, grouped into CW, Digi and SSB submenus (now Keyer and Decoder are submenus of CW) Added up to two more USB Virtual COM serial ports (configurable) LCD versions of AF, RF, Image, LPF, Test ADC I/Q sweeps (miniature graph on LCD) New function PA mod. test to check operation of amplitude modulator Diagnostics screens are now available on the LCD interface too Now remembers previous menu location on ALL menus regardless of nesting level Add way of forcing factory reset, press Menu (left) button during power-up Change TX color in diagnostics screen from red to blue, to avoid confusion since red things are errors Added CAT LC command to retrieve LCD contents Added CAT commands SA (AGC meter), SM (S meter), PC (Power meter), SW (SWR meter) Added CAT command SS (get/set SSB input source) Bug fix: PTT P did not work properly Bug fix: Incorrect PA voltage display on the Diagnostics screen 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl

When Elecraft introduced the KH1 a year ago, I was immediately enthusiastic about the concept. A small and lightweight shortwave radio with an integrated telescopic antenna. This means that, weighing less than 400g, it can be used in any suitable location on shortwave. So I wanted to build something myself. I immediately began my own experiments with telescopic antennas for 7-30 MHz. This confirmed that a counterweight is absolutely necessary. This wire, which is a quarter of the wavelength long, contributes significantly to the radiated energy. So the idea arose to forgo the telescopic antenna and experiment with end-fed wires twice the length. Of course, it makes sense to stretch the wire as high as possible. But I also got respectable reports with EFHW lying on the ground or in bushes. In this place the antenna may detunes itself, so a tuner is necessary, as well as the standard 1:64 transformer (Unun). The tried-and-tested resonance circuit (Fuchs Kreis) performs both tasks. Once the antenna issue was resolved, QRP Labs brought out the QMX. The ideal TRX for my projects, and now even capable of SSB. Now all that was missing was a suitable housing with an integrated battery and a speaker with an amplifier. Then a paddle for CW as a contactless touch key directly on the device. And the QMX Carrot was finished. But it wasn’t that simple, because everything had to be as small and light as possible. It now weighs 340g and measures 15x8.5x3.0 cm. I’m happy with that. 73 Chris https://youtu.be/0kksiWVOtnQ

First VARA (Winlink) tests with the new SSB-firmware. CESSB is turned of for that. Looks like that it works flawlessly.

Hi everyone. With the release of the SSB firmware out of beta, I thought I would make my offer to source K6ARKs wonderful little microphones, which can be found here: https://www.printables.com/model/320559-mini-microphone-for-qmx-trusdx-usdx-kx2-and-kx3, one more time. Adam (K6ARK) made a super fantastic little miniature mic case, and they work with the QMX quite nicely. I print the cases in PLA, and have the following colors available: Black, White, Grey, Navy Blue, Orange, Light Green, Red, Gold, Purple, Sand Stone, Light Blue Stone, Turquoise stone, and Marble Stone (The stone colors look like marble or granite - little flecks of darker color in them - The marble one winds up looking like bleached bone). The kit includes: 3D Printed case in PLA 3.5mm jack Electret Mic Element Microswitch for PTT For each mic, $10 for kit, $15 fully assembled and tested. This price includes shipping in the US. I am happy to make you more than one, some people want one for home and one for the go bag, that's great. You will need to provide your own AUX cable (3.5mm male to male) to go between the mic and the radio. I have had several ask what cord I am using, So I have included this link to one I am using and that I test all my assembled mics with; it seems to work quite well: https://a.co/d/36GDDXf (This is a shortened, non-affiliated link to Amazon.com page for the cable I use) If you are interested, send me a private email, and I will send you payment details. My email address is good on QRZ.

I have corrected all the issues with my enameled torroid soldering joints, so those look reasonable now on all bands. That said, I have no power whatsoever when pressing "T" on the diagnostics screen. I am using 3 cell LIPOs charged to 11.9vdc (checked after charging with multimeter) for power. T501 wound for 12v. - Initial startup was at 7v, just to be safe. No issues or magic smoke so slowly raised voltage to 12V with no issues. No pops or anything else. - Checked T507 by removing and testing, then reinstalling. - Removed and rewound T501, RWTST, to eliminate concerns of over twisting the wires. - Rewound T401 and checked for continuity on the 3 pairs, then installed it. - T502 has continuity and the correct amount of wraps. - The dummyload I am using is one I purchased along with the kit. Assembly was enjoyable and it measures 49.5 ohms. When I press "T" I get 0.0 power. I checked the SWR protection set it higher, and restarted the radio, but still get 0.0 on the diagnostics screen. I then turned the SWR protection completely, then restarted the radio and still 0.0. The power transistors DO get slightly warm, but not suddenly. From what I can tell, everything is as it should be, but I'm still getting no power to the dummyload. I have no actual antennas yet, but should have one completed in a couple hours. I checked several patch cords (between radio and dummyload) and they all are working correctly, but still no power. What should I be checking now? Is there a test procedure for this specific issue? There has to be others who have encountered this before... Thanks again, btw... Ahand59

The radio is a Ver. 1 QMX plus that in general performs exactly like I expect. It does not have the GPS option installed, and there is no battery in the clock battery slot. The radio is used for CW only. As the title suggests, I have an approximate 1000 tone on only 12M and 6M bands. It is internal, in that I can remove antenna and it's still there. It does not change in level or tone while tuning around the band. It appears to de-sense the receiver a bit, as a signal must be pretty strong for me to be able to copy it on 12M. There is normally a 'beat' frequency between the received signal and the tone when I can copy someone. I have run the I/Q sweeps in Putty, using a raspberry pi computer. The tone is present with or without the computer attached. The I/Q sweeps look very nice on the lower bands, and begin to deteriorate as the frequency goes up. They are still showing the two sine waves, but are a bit distorted( not a perfect line of x's ). This deterioration is also noted on 10M and 15M ( to some extent ) and the sweeps for 12M and 6M are not suspiciously worse than others. 10M works flawlessly, as do the other bands. The remaining filter sweeps look good, with some tweaking needed possibly, but totally functional as is. I have a set of QMX HB and LB radios to compare symptoms, and the HB QMX does not have the 'tone' on 12M when swapped into the system. I am curious what path to take troubleshooting this issue. I did not find anything in the archives that addressed this strange behavior. Thanks & 73 Dick W4PID