qmx+ cw reader

Martin DK3UW All Messages By This Member #142307 Hi My reader is very erratic with a lot of *. can someone who has a good setting let me know how they are please -- Martin DK3UW
KK4ITX John All Messages By This Member #142371 开云体育 GE Martin, I would start with the settings that are in the manuals, then; * Turn the volume down! If too loud it’s hard to translate. * Next adjust your filters correctly? * Try to use the Noise Blanker The rig needs to hear the cleanest signal you can feed it. When it’s not clean you get “”. Sometimes you have to move slightly off frequency to get the best results. You can usually achieve 70-90%, you have to be able to fill in the blanks. The QMX+ seems to be better than my 3 QCX rigs but I am new with the QMX+. Hopefully this helps, John? KK4ITX? ?Each mistake is a learning opportunity.? toggle quoted message Show quoted text On Apr 2, 2025, at 11:10 AM, Martin DK3UW via groups.io <m.sellschopp@...> wrote: ? Hi My reader is very erratic with a lot of . can someone who has a good setting let me know how they are please -- Martin DK3UW
@DA2CW All Messages By This Member #142378 Martin, I figured my QMX+ translates best, if the keyer speed is set to the approx. speed of the incoming signals. Be it received or when in practice mode. The manual hints at some parameters to play with for the decoder. My settings are the defaults. Norbert, DA2CW

开云体育