开云体育

Blocking a band on QMX/QMX+

Larry Christensen All Messages By This Member #137088 I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
Alan G4ZFQ All Messages By This Member #137089 On 13/01/2025 21:13, Larry Christensen via groups.io wrote: I would like to block out the bands I don’t use. Larry, I'm fairly certain that you delete them from the band list seen in terminal mode. Manual should help. 73 Alan G4ZFQ
Len Bandala, KJ9E All Messages By This Member #137091 Larry, I believe that you can “enable/disable” bands using Putty terminal mode and the “band configuration” menu.
Hans Summers All Messages By This Member #137112 Hi Larry Cuurrently the only way is to reconfigure your band configuration screen to delete the bands you don't want.? In future I will add a toggle so that a band can still be in band configuration but can be disabled so that double clicking band change skips over it. It's already on my list.? 73 Hans G0UPL toggle quoted message Show quoted text On Tue, Jan 14, 2025, 00:13 Larry Christensen via <larryna0f=[email protected]> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
Larry Christensen All Messages By This Member #137127 Hans? Thank you for your answer.? I will wait for the time that change is in a firmware update.? I know you have more important items to keep you busy.? Larry NA0F?
Bill All Messages By This Member #137129 开云体育 Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via groups.io <larryna0f@...> wrote: toggle quoted message Show quoted text I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
ta2rx bekir All Messages By This Member #137158 I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far. 73! de Bekir TA2RX 14 Oca 2025 Sal 18:05 tarihinde Bill via <bill=[email protected]> ?unu yazd?: toggle quoted message Show quoted text Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via <larryna0f@...> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
Ronald Taylor All Messages By This Member #137160 Bekir, it sounds like you may have your radio configured as an 80-20 meter QMX instead of as a 160-6 meter QMX+.? Ron toggle quoted message Show quoted text On Tue, Jan 14, 2025 at 19:01 ta2rx bekir via <ta2rx.bekir=[email protected]> wrote: I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far. 73! de Bekir TA2RX 14 Oca 2025 Sal 18:05 tarihinde Bill via <bill=[email protected]> ?unu yazd?: Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via <larryna0f@...> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
ta2rx bekir All Messages By This Member #137161 Nope. It is configured for 160-6 but there are no values listed in the manual under Putty's Band Configuration menu, except for 5 bands. Seeing the post on how to block certain bands, I am concerned my rig will not work on the unlisted bands. 15 Oca 2025 ?ar 05:07 tarihinde Ronald Taylor via <wa7gil=[email protected]> ?unu yazd?: toggle quoted message Show quoted text Bekir, it sounds like you may have your radio configured as an 80-20 meter QMX instead of as a 160-6 meter QMX+.? Ron On Tue, Jan 14, 2025 at 19:01 ta2rx bekir via <ta2rx.bekir=[email protected]> wrote: I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far. 73! de Bekir TA2RX 14 Oca 2025 Sal 18:05 tarihinde Bill via <bill=[email protected]> ?unu yazd?: Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via <larryna0f@...> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
Stan Dye All Messages By This Member #137162 The screen scrolls to the higher bands. Move the cursor across to the right and keep going.
ta2rx bekir All Messages By This Member #137163 Ah! Great info. Thanks a lot. 15 Oca 2025 ?ar 05:58 tarihinde Stan Dye via <standye=[email protected]> ?unu yazd?: toggle quoted message Show quoted text The screen scrolls to the higher bands. Move the cursor across to the right and keep going.
mux_folder2001 All Messages By This Member #137164 开云体育 Open the band configuration screen with Putty. Use the right arrow to move to the right. When you get to 20 Meters another right arrow press will scroll the window so you can see the next band.? Tony AD0VC toggle quoted message Show quoted text From:[email protected] <[email protected]> on behalf of ta2rx bekir via groups.io <ta2rx.bekir@...> Sent:?Tuesday, January 14, 2025 7:37 PM To:[email protected] <[email protected]> Subject:?Re: [QRPLabs] Blocking a band on QMX/QMX+ ? Nope. It is configured for 160-6 but there are no values listed in the manual under Putty's Band Configuration menu, except for 5 bands. Seeing the post on how to block certain bands, I am concerned my rig will not work on the unlisted bands. 15 Oca 2025 ?ar 05:07 tarihinde Ronald Taylor via ?<wa7gil=[email protected]> ?unu yazd?: Bekir, it sounds like you may have your radio configured as an 80-20 meter QMX instead of as a 160-6 meter QMX+.? Ron On Tue, Jan 14, 2025 at 19:01 ta2rx bekir via ?<ta2rx.bekir=[email protected]> wrote: I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far. 73! de Bekir TA2RX 14 Oca 2025 Sal 18:05 tarihinde Bill via ?<bill=[email protected]> ?unu yazd?: Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via ?<larryna0f@...> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F
ta2rx bekir All Messages By This Member #137165 Thank you, too, Tony. 15 Oca 2025 ?ar 05:59 tarihinde mux_folder2001 via <canthony15=[email protected]> ?unu yazd?: toggle quoted message Show quoted text Open the band configuration screen with Putty. Use the right arrow to move to the right. When you get to 20 Meters another right arrow press will scroll the window so you can see the next band.? Tony AD0VC From:?[email protected] <[email protected]> on behalf of ta2rx bekir via <ta2rx.bekir=[email protected]> Sent:?Tuesday, January 14, 2025 7:37 PM To:?[email protected] <[email protected]> Subject:?Re: [QRPLabs] Blocking a band on QMX/QMX+ ? Nope. It is configured for 160-6 but there are no values listed in the manual under Putty's Band Configuration menu, except for 5 bands. Seeing the post on how to block certain bands, I am concerned my rig will not work on the unlisted bands. 15 Oca 2025 ?ar 05:07 tarihinde Ronald Taylor via ?<wa7gil=[email protected]> ?unu yazd?: Bekir, it sounds like you may have your radio configured as an 80-20 meter QMX instead of as a 160-6 meter QMX+.? Ron On Tue, Jan 14, 2025 at 19:01 ta2rx bekir via ?<ta2rx.bekir=[email protected]> wrote: I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far. 73! de Bekir TA2RX 14 Oca 2025 Sal 18:05 tarihinde Bill via ?<bill=[email protected]> ?unu yazd?: Larry, ???? An old post to this forum (that I can't find now)?recommended that in the PuTTY Band Configuration screen, you change the band's "Band Name" to 0 (zero).? I've done this and it works.? It eliminates the band when you switch the band switch from the front panel. ? Bill W2EB East Syracuse, NY On 1/13/2025 at 4:13 PM, Larry Christensen via ?<larryna0f@...> wrote: I would like to block out the bands I don’t use.? I asked this once before but never got an answer on how to do it if it is possible.? That would make moving though the bands I do use much easier and faster.? TIA Larry NA0F

Previous Topic Next Topic