Re: Blocking a band on QMX/QMX+
|
Nope. It is configured for 160-6 but there are no values listed in the manual under Putty's Band Configuration menu, except for 5 bands. Seeing the post on how to block certain bands, I am concerned my rig will not work on the unlisted bands.
15 Oca 2025 ?ar 05:07 tarihinde Ronald Taylor via <wa7gil= [email protected]> ?unu yazd?:
Bekir, it sounds like you may have your radio configured as an 80-20 meter QMX instead of as a 160-6 meter QMX+.?
Ron I want to do the exact opposite of this. I want to be able to use my QMX+ on all bands, especially the upper bands. However there are no values listed for bands higher than 20m in the Band Configuration menu. That is why I asked what the ideal values should be on 6, 10 and 15m but could not get any answer so far.
73! de Bekir TA2RX
Larry,
????
An old post to this forum (that I can't find now)?recommended that in
the PuTTY Band Configuration screen, you change the band's "Band Name" to 0
(zero).? I've done this and it works.? It eliminates the band when
you switch the band switch from the front panel.
?
Bill
W2EB
East
Syracuse, NY
On 1/13/2025 at 4:13 PM,
Larry Christensen via < larryna0f@...>
wrote:
I would like to block out the bands I don’t use.?
I asked this once before but never got an answer on how to do it if it is
possible.?
That would make moving though the bands I do use much
easier and faster.?
TIA
Larry NA0F
|
