Hi,
I have understood that, when relay-switched LPF kit is in use (is?plugged, with LPF kit in?place?"1") the RF out?can be accessed from multiple locations?on the relay-switched LPF kit board.
1) Can I still use the original RF out point on U3S main board? What if the?relay "0" is not in place? ("0" is on main board)
2) Further, what would be the recommended placing for four LPF kits into places "0" - "5"? Where should the RF out be accessed then?
Tapio OH2EYY?
Tapio OH2EYY