开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. QRPLabs
  2. Topics

QMX+ new build AGC does not work.

 

Everything else seems to work, but no AGC. As a result, there is distortion on loud CW sigs. Yes, it is enabled in the Audio menu. 027 firmware.
Any ideas would be appreciated. Thanks, Dick, K5AND
 

It may work to turn down the agc threshold to about s6 or even lower.? My agc didn't often activate when I used the default threshold.
?
I had the volume turned up to hear quiet cw signals, and so my speaker was being over-driven by the few very strong cw signals. So I needed to turn the agc threshold down to make the strong signals weaker.
 

开云体育

Thanks, Stan. Will try.


On Apr 4, 2025, at 7:49?PM, Stan Dye via groups.io <standye@...> wrote:

?
It may work to turn down the agc threshold to about s6 or even lower.? My agc didn't often activate when I used the default threshold.
?
I had the volume turned up to hear quiet cw signals, and so my speaker was being over-driven by the few very strong cw signals. So I needed to turn the agc threshold down to make the strong signals weaker.

1 - 3 of 3