开云体育

Steve, you are correct in the west propagation being poor. I have a hard time getting across the Mississippi river. Carl

On Tue, Jul 17, 2018 at 06:29 AM, N1BUG wrote: > > Thank you Paul and very informative. And yes I am hitting Australia an New > Zealand.? I remember in days of old the far east was common. I like

Check the manual. ?I recall that there was an option to have positive keying as well (some rewiring may be required) -- 73, Bernie, VE3FWF

Hans, Thanks for your explanation. I do understand your reasons. If I were doing a new design I would use the TWI/I2C port for a SI-5351 and the SPI port for an AD9850. The 49er DDS VFO uses a I2C/TWI

Thanks for the suggestions. I’m in the process of replacing capacitor that was toasted. Will keep looking. Gary K4VIG

Hi Carl, When you say the dipole is arranged north and south, do you mean the wire runs along a north-south line? I am also in Maine. I am a DXer with several decedes of experience. It may be just

I don't use any of the'whisper' modes, but Japan to Eastern north America propagation is pretty difficult on the HF bands now. Steve Fabricant JS6TMW

I've been wondering about this as well, but I don't have the cases in hand yet.? Just got shipping confirmation, so WooHoo!?? Anyway, I was thinking something like this would work, but again, hard

I have noticed that I get spots from most of the world but none from the far east. My location is in Maine using dipole arranged north and south. Is it only me?? Carl

I don't understand that. The SB-104a and HW8 are SS. Where does the grid come in to play?

Hans, It was interesting to read the “back-story” of your kit development. ?Thank you for sharing this with your user community. 73, ?Ben ?K0IKR

shouldn't that work in the straight key mode ?of the QCX 73 Martin

Hello Joe The Si5351A chip has three stages conceptually: 1) Multiply the 27MHz reference crystal up to an internal VCO frequency, that theoretically must be in the range 600-900MHz 2) Divide down in

Hi Bob, Michael In the beginning (or at least closer to the beginning) was the Ultimate QRSS/WSPR kit http://qrp-labs.com/qrsskitmm.html with a crystal oscillator whose frequency was pulled by an LED

I like the look of that setup.

Hi, Have had my qcx case for several weeks, and i really enjoy it better than the ideas I've used until this point.?? Question regarding the opening just above the gps connection on the rig when

The Heathkit keyers are made for Heathkit's GRID BLOCK keying. They switch a NEGATIVE voltage to ground. Bob Macklin K5MYJ Seattle, Wa. "Real Radios Glow In The Dark"

The QCX keying requires a 3.5mm stereo bullet plug. For straight or bug semi auto keying connect to the tip and the body of the plug. Leave the second ring unconnected. And you'll be right!

I have two Heathkit electronic? keyers and wonder if they can be used on the QCX. I ask because it will work on my Heathkit SB 104a and Kenwood TS 820s but will not work on my Icom 740. The Icom

What you guess about the SDA/SCL lines is correct. I'm just wondering why so many people avoid using the I2C(TWI) interface as designed. I'm trying to learn how the Atmel I2C/TWI interface actually