开云体育

Forgot to mention. CHU 3330 kHz is also roaring in on the QCX-17 tonight. 72 / 73, Bill, N4QA

Wooooooohooooooo! Sent: Friday, April 12, 2019 3:19 AM To: [email protected] Subject: Re: [QRPLabs] Friedrichshafen 2019 Hi Steve Please, will you have a stand at Friedrichshafen this year? Yes. My

Tonight, I'm running the QCX-17 on EIGHTY METERS ! While transmit power is down near zip point zilch, the attached screen shot shows what I'm seeing ( and hearing, quite loudly ) on 80m FT8 on the

Thanks for the info. Regards, Gary W0CKI

Try to address >THEM< directly. qrpguys@... I included 'THEM' in this posting, too. [email protected]> wrote:

Recently discussed at length here:?/g/QRPLabs/message/30865

Not to worry, you'll get your order. They only ship once a week and if you order on the same day as the pickup, chances are it will be a week for the order is shipped. That said, they are as reliable

Kinda off topic but, has anyone had any experience with QRPGUYS? I placed an order, it's paid for but I have heard nothing in over a week.

That's pretty much it, Dave ! I'm keeping a couple of fingers on Q1, Q2, Q3...so far, so good. Supply voltage = 13.8 VDC Power output level somewhat different for each band. FB on Forest We might try

Well, well, well ! Just told my QCX-17 that it's a QCX-60 and, WHAMMO ! It just received its first RBN spot on 5331 kHz from KM3T in New Hampshire, I think it is. Don't worry, keeping a watchful eye

Bill, You have external filtering, you tell your QCX-17 that it's something else, and you go to the frequency you want. Do I have that right, or is there more to it? How do you keep from cooking your

OOPS! There's also stuff in firmware that tells each QCX how to act ! ?So, I need to add 3) because?I just discovered that, by fibbing to the QCX-17 by telling it that it's a QCX-40, CHU 7850 kHz is

The easiest way to give a listen for CHU 7850 kHz on a QCX-40 would be to store 7850 in one of the rig's Frequency Presets, and then transfer that to, say, VFO A. Don't forget to add your cw offset

Hans Register 03 is set to 0.? It does jump frequency every second when it is zeroing in on the right frequency. 73, Steve VE3SMA

Hello all, As a U3S WSPR user, I 'am looking for the possibility to use the VFO/Signal Generator kit + 12M LPF for use as a _*sinus wave*_ +/- 25 MHz. generator to act as a LO-signal of a satellite

Hi Steve What value have you got in the GPS threshold register, which is register 03? You need 0 in this register for best accuracy. 73 Hans G0UPL http://qrp-labs.com [email protected]> wrote:

Hi Steve Yes. My latest information says my stand is in the main hall at A1-608. Yes 73 Hans G0UPL http://qrp-labs.com >

According to the Hamradio website, Hans will be at stand 604 in Hall A1 73, Dave G3VGR

@c.s.coles this should clear it https://www.qrp-labs.com/ultimate3/u3info/u3sbifilar.html I have U3 kit which I have modified to a U3S so I dont have any bias port on my pcb, but as you might have

> > I confirmed this behaviour in a comparison with WWV at 5 MHz this morning. > I started the Progrock without the PPS input. It started out about 10 Hz > below WWV's carrier and drifted to a couple