开云体育

Missed opportunity? I wonder if from the ground, last heard it was at about 60K feet, if the payload has as much reflective surface as the first communications satellite, Echo 1. Its too far from me,

read the comments in this thread. many postings have indicated units that have been found to have NO RFI problems ... the ones I recently posted are perfectly clean in my experience. w2jc

I bet it has a self destruction device....

If you can’t enjoy the absurdity of it all, please just mute this topic..... these interruptions to windings and blown components are relaxing. And to boot many folks here actually fly balloons and

These DC-DC converters look interesting - is there any rule for figuring out which ones are going to generate RFI and which ones would be clean? Or is it just a case of pot luck then cover the wires

Sounds like a job for our newly created Space Force to have fun with a goal of bringing it down safely? over US territory and give it a good examination.

RESOLVED: Turns out IC4, the FST3253, was the culprit. Thanks to everyone how responded and helped out. Its a testament to how awesome this group is. -- regards, Bryan, N0LUF

When you run your own group, then it's your call. In this case you don't. -- - 73 de Andy -

John, Ignore it /g/QRPLabs/message/96809 there never has been any details, it was just for the initial QRP Labs setup. 73 Alan G4ZFQ

Confirmation of reading: your message - Date: 3 Feb 23, 12:10 To: "Randy K7RAN" <k7ran@...>, QRPLabs@ Subject: Re: [QRPLabs] QDX not receiving after replacing blown transistors Was read at 22:15,

Hans is not only on vacation, but has a very light moderation touch. You are welcome to run your group as you choose. Please notice the links at the bottom of _every_ emailed post offering to “Mute

Nothing new. When Sputnik 1 was laughed [LAUNCHED - thank you dictation software], the Daily Express asked why the RAF didn’t go up to shoot it down. John F5VLF G3PAI

Thanks, Cliff, for the heads up! This is the plus version but I’ll try to be conservative with the voltage. I tweaked the BPF a bit more: took a winding off from both L3 and L2 and this gave me more

This group is a free for all so just join in with your own favorite subject rant! Roy WA0YMH

Or delivering Trump's next rambling speech.??? Roy WA0YMH [email protected]> wrote:

Why is this political BS on here? if I was the owner of this page that person would be banned. Joe WB9SBD

Maybe after the combined armed forces is able to create a leak in the balloon envelope .... they can tow the descending balloon to Roswell NM which could use a boost after Covid. Dave

As soon as I bring up the card on WSJTX 2.6.0 LED2 is OFF? John

I received a new 20-80 Rev 4 QDX some weeks ago and now have time to place it in a case. It is a built and tested unit direct from QRP-labs. It is a 12v unit that I am running at 9V. Power on -- I see

I'd like to see the Air Force poke a few holes in it and after it lands, see what it was actually doing. Personally, I think it was delivering paychecks to Joe and Hunter...but that's just a guess.