开云体育

I hope the QRP Labs' ecommerce server is ready for the onslaught! Fingers crossed! --Al WD4AH

Still not right... with all new semiconductors, still have a strange reading at pin 3... about 7.5VDC with a small AC component of about 100mV (probably from PS ripple etc). I've pulled all the power

On a side note, a friend of mine used to reload .223 with a Lee Loader kit.? Once while priming a case he got a bit over-enthusiastic with the hammer and tool used to seat the primer and BANG!? He

Nigel, In the absence of any other reply to this thread perhaps try again with A more relavant subject? Maybe "HELP U3 owners can you do a recording?":-) 73 Alan G4ZFQ

Pat, Your comment about the shells brings back a memory. As a youth probably in early bot scouts we made a visit to the sheriffs office for a tour. After being shown all the armaments available to

James, What is that spring loaded round drum on the front of the half track? Dave K8WPE David J. Wilcox’s iPad

Hello Julian YES! Firmware version 1.03 is compatible with the earlier board revision (Rev 1, having the pull-up resistors), yes. YES! The new PCB Rev 2, must use firmware version 1.03 (and

Congratulations, Hans! A clarification on firmware, please: Rev 1.03 will be compatible with the earlier board rev, with the pull-up resistors? And not that anybody would do so, but just to be clear,

Now we're in counterpoise business ! Where can I get one? Michael 2E0IHW

Randy No, I think you should see something. I upgraded my U3 to U3S long ago so do not remember much. All I can suggest is to check voltages are OK and no bad joints, pins not inserted correctly on

Paul, App note 001 here https://qrp-labs.com/appnotes could give better stability without TCXO. It really depends whether you have time and inclination to fiddle:-) Many techniques were used before

Hi all QDX batch #2 sales will commence at 1800Z on Friday 17-Dec-2021, at http://shop.qrp-labs.com/qdx QDX batch #2 is 375 kits. Some of these have to be allocated to batch 1 leftovers due to the

Hello Cristi Yes, you can add /P in the WSJT-X programs but the way it handles it is sending two WSPR messages instead of one, with the disadvantages I mentioned. The actual WSPR protocol can only

- Ironie switched on: - This seems to be a problem in US-America only! I could not 'buy' any weapon or amunition here in EU egaly! So I have to look for an alternative way, to open the 'holes' in

Q6 just pops occasionally for no understood reason. Replaced mine with a small power package PNP and no problems ever since.

Thank you Steve. It help. 73 de YO3FFFCristi Pe mar?i, 14 decembrie 2021, 21:22:20 EET, Steve via groups.io <qed28@...> a scris: Hi Cris, Does this link help? [600MRG] Long

Hi Hans, I never dig deep into WSPR to know such limitation. Before U3/QCX I've used the original WSPR/WSJT-X programs and in there such "/P" is allowed. So I can say this is the limitation of the

Curt, I am honored to have a friend like Jesse. Jesse was an Amateur Radio Operator for many years. He is a Marine, a history expert on WWII and a great guy who works with his Unit to explain the

Static dissipator is now attached to the counterpoise....