开云体育

My ProgRock order has been stuck at Grace-Hollogne since Oct 29 (11 days) with no further updates. My previous order from QRP Labs only took a week to be delivered to Australia. Regards Ian

That reading will also be influenced by the SWR of your antenna. What is the reading while radiating into a dummy load? -- John AE5X https://ae5x.blogspot.com

Evan You were right on with the power setting. I had set it up on 40 but it was still down at mid-level on the other bands. I was sure that I had set them all. I found something unexpected about

Are you sure it’s not an alignment issue? I don’t hear any 700 Hz tone on my QCX Mini with headphones, earphones or powered speaker. It’s just a quiet hiss. I get some noise when I use a

Evan, Oh this is interesting.? You made me look closer at the schematic.? I don't think it's quite that the RF sweep has anything to do with the transmitter circuitry.? If you look, CLK2 from the

I saw mention made of MFSK as a mode and I wonder how many realize MFSK can be used to send images. Yes, images! I've been a fan of Kim Elliott's (KD9XB) program carried over shortwave, "Shortwave

My guess is that the MFJ is being ‘a bit’ generous. The only way to be really sure is to measure with a scope or a known-calibrated (at the frequency of interest) meter. Mike WM4B Sent: Monday,

Just wondering if anyone else is getting 9W or thereabouts on 80M with 12.2V and drawing 970mA and I have the 3:2 windings.? That is way higher than the graph on page 4 of the manual.? After tuning

I have just finished building it inc. The polyphase module Now got to link all the bits together and test it Peter M0PWX M0PWX Grabber Page (qsl.net)<https://www.qsl.net/m0pwx/grabbers.htm> Sent: 08

Suat, The RF sweep is measuring the total response that includes the transmitter/receiver LPF.? I would contend that most, if not all are the measurement is the response of the LPF.? The bandpass

Yes, and the signal is injected through a 100k resistor (ok, well, it has a fraction of a pF parallel capacitance too https://www.vishay.com/docs/60107/freqresp.pdf) so it will act as a "current

Fred, Fred, At first, I did think that the TX line out of the STM32 was at fault and reported the symptoms in the other thread.? After Hans posted the way that the PTT actually works I went back and

You will see different results but they will be wrong. You must use a dummy load, any signals or noise received will give false readings. 73 Alan G4ZFQ

Hi Peter, since I am interested in the receiver module (keyword: WSPR-"Transceiver"), I would be curious to see what you can report in terms of sensitivity. I would be happy about your message here.

Interestingly the tone seems to be much louder relative to the band noise when using headphones over a speaker. Perhaps the impedance of the audio device you have plugged in is effecting this? The

I re-did the L12 quite carefully but pretty much nothing changed on the rf filter sweeps. Either I did the same mistake twice or there is something else going on. I was only looking to shape of the

Well that's good news I guess.... I thought you said that the TX line from the processor was not functioning at all... I guess I misunderstood. As bad as it potentially sounds for Hans, in reality we

Regarding Olvia, I'm CQ'ing on 7.0714 dial (8/250), recorded it with another receiver, played the WAV in fldigi and it did decode! So I'll keep trying, see if I can make a QSO.

See the last page in the manual ( Page 106 in current version)? All of Hans' manuals contain detailed revision status.

Is it possible to get a summary of the revisions to the manual? I printed mine yesterday in anticipation of today’s arrival and now see there’s a revision posted today. Don W6CZ