Re: A guide to setting up Argo can be found
Thank you Steve.
73,
Slim
By
"Slim \(WT4C\)" <wt4c@...>
·
#616
·
|
Re: UQRSS with WSPR (without/with GPS) and FSKCW3 (with GPS) on 30 M
Paul,
I am interested in the idea of the magnetic loop antenna. I wonder how many db down they would be on a big horizontal loop like mine. The advantage of being able to hide it in the loft of the
By
"TONY_VOLPE" <tony.volpe.1951@...>
·
#615
·
|
A guide to setting up Argo can be found
here<http://www.users.on.net/~davroz/vk6di/Beginners%20Guide%20to%2030M%20QRSS%20Reception.pdf>
.
I hope this helps those of you who are just starting off in the wonderful
world of QRSS.
73s Steve
By
Stephen Farthing <squirrox@...>
·
#614
·
|
Re: UQRSS with WSPR (without/with GPS) and FSKCW3 (with GPS) on 30 M
Hello Tony,
Thank you for your answer and your findings!
This helps to understand better what the little thing is doing hi.
Yes here, (UQRSS 30 M v 1.04 firmware) I did a quick temperature
By
"paulwijnand" <paulwijnand@...>
·
#613
·
|
Re: UQRSS with WSPR (without/with GPS) and FSKCW3 (with GPS) on 30 M
Interesting findings Paul.
I have found that the oscillator frequency is very prone to temperature changes. I have two kits and this is more noticeable in one of them than in the other. I think the
By
"TONY_VOLPE" <tony.volpe.1951@...>
·
#612
·
|
Re: Can't now decode my own WSPR signals.....
Hi Tony - tnx to you and everyone else for helpful and amusing comments. I've been really busy since resolving my recent problems and haven't had the opportunity to log back into the group.
I can
By
"g4sfs" <g4sfs@...>
·
#611
·
|
Re: UQRSS 30m
938 WSPR spots in 24 hours with the new 30 meter UQRSS
I bought another kit intending to put it on twenty meters.
I had 'penned' a crystal down to 14.097 and hoped it would do the job, but I
By
"TONY_VOLPE" <tony.volpe.1951@...>
·
#610
·
|
Re: UQRSS with WSPR (without/with GPS) and FSKCW3 (with GPS) on 30 M
By
"paulwijnand" <paulwijnand@...>
·
#609
·
|
My Ultimate order
Steve,
?
I think I may have under payed for postage to my United States address. I do hope that my order went out by air, despite my oversight. I remember choosing UK First Class, not knowing what
By
Gary Kohtala <gary.k7ek@...>
·
#608
·
|
G0UPL beacon kits - Order processing and shipping - please ignore if you are not a customer.
Hi everyone,
Just a quick note to let you know what to expect when you place an
order with us for a basic model beacon or an Ultimate one or anything
from the shop.
I pack orders once a week,
By
Stephen Farthing <squirrox@...>
·
#607
·
|
Spanish kit instructions translation
Hi all
Many thanks to Luis EA2COA who made a Spanish translation of the "Ultimate
QRSS kit" instructions (v1.04). It can be downloaded from
http://www.hanssummers.com/qrsskitmm
73 Hans
By
Hans Summers <hans.summers@...>
·
#606
·
|
UQRSS with WSPR (without/with GPS) and FSKCW3 (with GPS) on 30 M
Hello all,
Build the UQRSS for 30 M a few days back and started without the use of GPS.
Nice kit to build! Thanks QRP-kit team!
Changed the capacitors C4 for 22 pF N750 and C5 for 15 pF N750.
Looks
By
"paulwijnand" <paulwijnand@...>
·
#605
·
|
Re: UQRSS 30m
Yes David - propagation has been dying off around 2300hrs but did you
notice how the skip went long in the middle of the night? All the 'local's
at 500km 800km vanished and then for me, the Americans
By
Tony Volpe <tony.volpe.1951@...>
·
#604
·
|
UQRSS 30m
Powered up and on air now for six days continuously.
One change made after 76hrs of operation to the transmission cycle and the
"Power" data was updated to show actual output power.
Has been
By
"David Barber" <david.barber@...>
·
#603
·
|
Re: Ultimate QRSS kit, pads for coils
Fixed has per Steve?s instructions.
73
By
"newarroja" <ct2iww@...>
·
#602
·
|
Ultimate Kit solder mask mistake in LPF
Hi Guys,
Please see here :- http://www.hanssummers.com/qrsskitmm/qrsskitmmmask to
see what you need to do about it.
73s Steve
By
Stephen Farthing <squirrox@...>
·
#601
·
|
Ultimate QRSS kit, pads for coils
Good morning,
I'm almost done assembling an Ultimate QRSS kit for 40m and noticed that the assigned holes to insert the coils do not have solder pads. Is this normal or should I proceed and do a
By
"newarroja" <ct2iww@...>
·
#600
·
|
You have probably seen this before but here is a nice collections of grabbers
QRSS Grabber Aggregator
http://www.vk4yeh.com/qrss_grabber.htm
la5vna Steinar
By
Steinar Aanesland <saanes@...>
·
#599
·
|
Re: QRSS3 beacon on 10139.957
Rather than build a special oscillator circuit, I am planning to build the new UQRSS kit with a crystal socket and use that to do the penning adjustments. Since in TEST mode the kit works as a
By
"TONY_VOLPE" <tony.volpe.1951@...>
·
#598
·
|
Re: QRSS3 beacon on 10139.957
"you and Hans need to know how much we appreciate the fun and challenge
the kits have given us."
Tony, I am 100% agree with you!
LA5VNA S
Den 28.08.2012 10:35, skrev TONY_VOLPE:
By
Steinar Aanesland <saanes@...>
·
#597
·
|