开云体育

Hi, I have a couple of kits coming here in the Great Lakes region USA. I see the kits left Turkey a while back and nothing beyond that. I just have to wait. Not everything carries "instant

Decided to tune around the 17m band to see what I might fine. There was XE2V calling CQ on 18082 kHz. Had a quick Q with om Mode after which he worked a bunch of others. QCX-17 finals nice & cool at

Yes unfortunately standard international package tracking in UK isn't very good compared to nearly every other country. But the packages will still arrive just fine, be patient for them sometimes! 73

Hi Dennis, Don't know which part of the world you are in but looking at your time of posting, I think you maybe a few degrees east of Turkey. Here in the UK, the kits I have purchased show item

Probably more than you ever wanted to know about an overworked QCX-17... With appropriate external filter ( except, none for 17m ) ? OHR WM-2 QRP Wattmeter Bird model 10-A-MFB-30 attenuator as a

Hi Dennis The tracking will (in most countries) also be updated in the destination country, once it clears customs. There can be a variable delay for that to happen. See also the information on

The tracking number only shows the status in Turkey. It showed the kit was forwarded to the destination country on April 10.? I have to be patient. Thanks Dennis

Thanks everybody! Richard, the Quadnet keyword was enough to help me find the software (which is super useful) and also several other projects by people who've built analog all pass filters of varying

Tom It has been done before http://qrp-labs.com/faq.html#fry Tom: Did you ever get your ?U3 going? ? -- 73, Bernie, VE3FWF

Thanks Arv Yeah I am not a newcomer to PIC programming so it is even more embarassing. The Norcal 2030 that I want to use this on mixes the 3MHz PTO with a crystal to get the final operating frequency

Joe Congratulations. Sounds like you are well on the way to becoming more stable...! The start at zero versus start at 1 is a very common error. Even the experts do that frequently. We count by ones,

Hold the phone Arv! On a hunch I thought what if the way the shift register is being handled is messed up somehow, and sure enough it was. In porting the code to the new architecture I defined a

EMRFD is out of date in the sense that many of the designs can no longer be built straight out of the book unless you're willing to scrounge for NOS components. But it's EXPERIMENTAL design, so

EMRFD is an excellent publication but the edition I use ( First Edition, 2nd printing ) has so many errors I have to check the corrections book before I trust anything just to see if an amendment has

Joe I may not be of much help here. I was assuming that your design was a traditional H&P layout. You did express yourself well, I just did not read it well. The G4DXZ design is PIC based with most of

Chris Ah yes, it takes a little thought, USB RX of WSPR is 1400-1600Hz above Dial frequency. The U3 frequency is true TX frequency. So the PPS is working correctly. 73 Alan G4ZFQ

Hi Arv I think I didn't express it well. All the functionality is internal to the microprocessor except for an RC integrator on the output pin. So a timer is setup to generate a hardware interrupt at

Oh dear, I think I have it.? I was tuning?to the WSJT frequency of 14.095.600 for example. I should have been turning to the frequency suggested in the manual. 14.097.100 for example. I feel a bit

Hi Alan, Oh sorry, should have clarified that. I'm trying to work 40 and 20 meters though the U3S. I'm using the 10m dipole to attenuate the signal further. Yes, I'm picking up spots from other people

I was hoping the person that sent me that would get more answers to look at here rather than to my private email.? There is the chance someone else had the same problem. I've build four of these and