开云体育

Kinda off topic but, has anyone had any experience with QRPGUYS? I placed an order, it's paid for but I have heard nothing in over a week.

That's pretty much it, Dave ! I'm keeping a couple of fingers on Q1, Q2, Q3...so far, so good. Supply voltage = 13.8 VDC Power output level somewhat different for each band. FB on Forest We might try

Well, well, well ! Just told my QCX-17 that it's a QCX-60 and, WHAMMO ! It just received its first RBN spot on 5331 kHz from KM3T in New Hampshire, I think it is. Don't worry, keeping a watchful eye

Bill, You have external filtering, you tell your QCX-17 that it's something else, and you go to the frequency you want. Do I have that right, or is there more to it? How do you keep from cooking your

OOPS! There's also stuff in firmware that tells each QCX how to act ! ?So, I need to add 3) because?I just discovered that, by fibbing to the QCX-17 by telling it that it's a QCX-40, CHU 7850 kHz is

The easiest way to give a listen for CHU 7850 kHz on a QCX-40 would be to store 7850 in one of the rig's Frequency Presets, and then transfer that to, say, VFO A. Don't forget to add your cw offset

Hans Register 03 is set to 0.? It does jump frequency every second when it is zeroing in on the right frequency. 73, Steve VE3SMA

Hello all, As a U3S WSPR user, I 'am looking for the possibility to use the VFO/Signal Generator kit + 12M LPF for use as a _*sinus wave*_ +/- 25 MHz. generator to act as a LO-signal of a satellite

Hi Steve What value have you got in the GPS threshold register, which is register 03? You need 0 in this register for best accuracy. 73 Hans G0UPL http://qrp-labs.com [email protected]> wrote:

Hi Steve Yes. My latest information says my stand is in the main hall at A1-608. Yes 73 Hans G0UPL http://qrp-labs.com >

According to the Hamradio website, Hans will be at stand 604 in Hall A1 73, Dave G3VGR

@c.s.coles this should clear it https://www.qrp-labs.com/ultimate3/u3info/u3sbifilar.html I have U3 kit which I have modified to a U3S so I dont have any bias port on my pcb, but as you might have

> > I confirmed this behaviour in a comparison with WWV at 5 MHz this morning. > I started the Progrock without the PPS input. It started out about 10 Hz > below WWV's carrier and drifted to a couple

Hi, His diagrams point to the low pass filters. Those are so very common they need not be included - merely mentioned. He mentions them:) 73, Bill KU8H

My completely stock QCX-17 has now made several contacts on the 20 & 30 meter bands. Due to poor conditions only, I haven't yet had a QSO on 17 & 15, but have received many RBN spots of my QCX-17 on

No harmonic filters? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Moderator – North American QRO Group at Groups.IO. email: <mailto:bill@...>

Hi Hans Please, will you have a stand at Friedrichshafen this year? If so, are you going to take a QSX prototype with you? Thank you. Vy 73 Steve, VK6VZ

I also see this as a party not a contest. So I was more interested in how many QCX have been worked by a station than the score. If you want a score, than couldn't it be? that participants give RST

Egads! In a couple of years from now the C Programming Guide will be 40 years old! Man, I'm so glad I haven't aged during those years... Jack, W8TEE

Will check :? The Issue appears to be from scores entered into 3830 manually and not understanding how it compiles total.? It would be helpful to determine how the scores were compiled/entered for