开云体育

Hi all. I just finished my first QCX build for 20m and I’m curious about the power output. I’m currently getting around 2.5 watts RF output based on the readings provided by the QCX menu 9.2.

Hi Dennis The PCBs cleared customs yesterday. It normally takes 3 days to reach us via a domestic courier service. So Monday we will start shipping out the pending orders. 73 Hans G0UPL

Dennis, my QCX to Colorado took 16 days.Gary W0CKI

Hello George, unfortunately,? I just took the station down, I moved into the garage, but my sinuses are going crazy, and I have a doctor's appointment & CT scan tonight, so for the day I'm QRT

Not at all. In the photo, the Receive menu option has the Morse Code Trainer (MCT) able to send Letters, Numbers, Punctuation, Words, Letters and Numbers, Call Signs, and a mock QSO. All are randomly

Steve, I will be on 7030 in a few minutes. 72 George/W2BPISent from my Samsung Galaxy smartphone.

getting curious about delivery time Dennis AG4TD

Do you mind if I ask for some details on the morse code trainer, Jack? / Gerry

I eventually got around to fixing my faulty volume pot last night and now everything works great... except, I'm only getting about 2.2W out (as measured by both the rig built-in meter and the external

I set everythibg up, but its simply too chilly to sit and be stationary, so im going to wait a little bit in the hopes that it warms up to a tolerable temp. Steve Raas? N2JDQ

With cold fingers and some coffee, I'm setting back up on the patio this morning. Dependant on other stations, I should be back on the air within an hour if any one wants to try & work me. 7.030 area

I'm using a 2.2" TFT SPI display in my Morse Code Trainer: and it draws about 0.06A, not great, but not that bad, either. The key thing for me is the quality of the libraries that support the display.

I was browsing around and I found that you can get small e-ink displays for very reasonable prices:

Good. Point. I just took the .hex file and Write all with Extreme Burner. Did not check the fuses. Thanks for the hint. B ________________________________ Feladó: [email protected]

Béla You have not set the fuses? /g/QRPLabs/message/24845 73 Alan G4ZFQ

I burned a new uP with 3.12a. It runs but it sloooow.. It legs the clock, and the screen is refreshing very slowly. I can navigate bit is very different than it was with the previous chip (3.10a) I

Not a very nice person then!

Thanks, Hans.? I will proceed assuming everything is working, even if a bit strangely! 73, Steve VE3SMA

Regarding conformal coatings, keep in mind that all the Max GPS series modules I am aware of are NOT hermitically sealed. They have a warranty period and some can be repaired. Usually for the way we

Hi? Last year I asked if there was someone who could assemble a fully fledged ultimate3s kit for me because visually impaired. A nice person responded and told me he could do, so I ordered, and paid