开云体育

I don't know what you're on about, but if you have some problem with me, why don't you deal with it like a grownup and send me private mail explaining what's wrong.? OK?? Cool. In the meantime,

I don't know what you're on about, but if you have some problem with me, why don't you deal with it like a grownup and send me private mail explaining what's wrong.? OK?? Cool. In the meantime,

I'm using ProgRock for the RX module LO. CLK0 drives the RX. I added an SMA to the CLK0 pads on the 5351 module for use as an LO monitor port. It drives an SMA on the back panel of my enclosure. Is

Dave, I am transmitting with 4 watts from a U3S on 477.710 QRSS from North Carolina. Dave, W4VU

Bill NZ0T, Now that makes sense. QCX,U3S,balloon flights..etc..separate sub topics rather than blended all together....good idea. Jim

:-/ On a whim I replaced the ?P with one from another kit (never been set up). Set it to 80m, went to alignment, selected peak Bandpass, the reading was 5. C1 doesn't change it... Swapped the old ?P

T1 is rewound and installed. There is no change in the bandpass peaking. C1 makes no difference. Peak value is 2 and about 3/4 of the bars. -- 73 NE5U Mike

Thank you Slim, you "get it". John Mazzone

Thank you all for your quick responses and tips. I am going to hold the coffee (and beer) and give it a shot! I'll report back! Thanks! Ron, AL7JR

I bought the tail end of a reel, and there are a >>LOT<< more than I will ever need.? $2.00 for 12 pieces plus shipping??? ?Due to the ridiculously high cost of international shipping? ($13.75

QCX 40 T1 wound ok after I figured out which ends of the wires went in which holes, so they would just drop right in. My problem came from not RTFM and leaving a longer loop on the windings. If I had

Yeah, it was a rational breath of fresh air, wasn't it. Geesh, next thing people will be yelling about "cookies" !

Do you feel better now?? Just saying. Lee, w0vt

Why are so many people getting their underwear bunched up over someone starting a facebook group? Nobody is being forced into using it - that is a choice that you make for yourself. If John wants to

True Blue seems to have rather quiet. Maybe he's keen not to let us know he's really John KM6HUV, who also posts as Hazada Masklo. I wonder who he'll be next week ? ;-) 73 de Andy

I find it very strange that a member of this group is hiding behind a nickname and won’t post his (or her) callsign. I specifically asked what it was when the New Year QRSS Party happened but

Take a look at how the Elecraft message board is organized.? It's all one group but there are several sub-groups suck as K3, K2, QRO, for different products.? Works great. 73,Bill NZ0T

It's easy to always a toroid in the same sense.? I always stick the wire through the toroid towards me and then start winding to the left side of that first wire.? On could do it the other way

Possibly you haven’t installed the microcontroller correctly. Check for bent pins and correct orientation. Regards, Steve

If it's still keying with the pin lifted then the ic leg input is likely damaged and a new processor ic will be required.