开云体育

I am having problems with my GPS QLG1 module. When connected I have the red and yellow LED on solid. Never see the green. IC2 has 5vdc on pin 3 and no voltage on pin 1 & 2, also extremely

I am having problems with my GPS QLG1 module. When connected I have the red and yellow LED on solid. Never see the green. IC2 has 5vdc on pin 3 and no voltage on pin 1 & 2, also extremely

The jumpers look fine, Ted. Get an LPF into position 1, or else use a wire to jumper in/out together, and then test continuity back from the antenna connector :) -- Ryan Flowers

voltage check on my ProgRock I'm running 10.5 volts into the LM317, and I'm getting 5.25 Volts on the 5 volt pin, on the 3.3 volts pin I'm measuring 5.74 volts with my Fluke 87 multi meter.? What

Thanks Ryan. I'm working from the LPF relay board down to the main board. Can you look at my relay jumpers, especially at the 1 and 5 ends? It's the rev5 board, which (I think) is different than the

"When I wound all the toroids and TI, I scraped all of the enamel off of lead wires with a sharp hobby knife (Xacto knife) right up to the core, and then tinned them.? I wanted to be sure, that I

Dear Members, I have just had my third day using the 30M QCX transceiver as the receiver for my 30M grabber. It is doing an outstanding job. It has a Nice 200Hz bandpass in the stock radio

Turned pwr on. Did alignment. Rcvr working great. Decided to set cw speed befor transmitting. Set speed to 16wpm. Now cant get out of that menue. Turn pwr off. Now nothing shows on display. Display

I did the test transmission on 40m band and the result is as below; My QCX is about 4.2W(Not 5W) output power and ANTENNA is ZS6BKW 29m Long 10m High hanging on the fishing rod at veranda. It works

sorry, stupid mail client not tracking incoming mails properly vs outgoing. This should have gone to a private individual --

I saw the tracking# on my USPS account site, thanks! Jim

Disclaimer: I have an Art background, not STEM. I have a Cheap Chinese LC Meter from eBay of unknown accuracy, not calibrated. I have two capacitors, that I have scavenged from electronics bought at

After I ordered my QCX #748, 20 meter kit, I printed and thoroughly read through the construction manual which is very well written and easy to understand, in my opinion.? Previous to receiving my

Hi Dave I can feel with you, because I am exactly in the same situation like you with a QCX for 60m, #741.? The only difference to your description is that I could successfully adjust the number of

Perhaps one might cover the shipping box with a fiberglass shell and paint it the desired color? I started this reply as glib humor but am now really considering this approach. FWIW

Nothing seems to have become of this flight except some mysterious data - 2017-11-13 14:32, 166, U3S19, 005XXH, m1, HO99, m2, HH15, pow, 60, sloc, AP,pos, 59.64583, -21.95833, 2660m, -13.73C, 4.21v,

Karl GREAT I have a 20 meter on order in the 1300’s. Lol i agree with your approach 100%.? I will use mine at times with a 6 meter transverter hoping that Hans will add Code for transverter

John, Sorry I do not understand. Yes, but how do you count the total number of pFs in your bag? Then, how do you count how many remain? They are not marbles the pFs are hidden. I use a dip meter,

Shipping supply houses sell cardboard spray paint to cover old shipping labels. Perfect to restore the original finish of the classic QCX case. Ken ke4rg Sent: Monday, November 13, 2017 11:15

Well said. Even homebrew LC meters can be as accurate , if not more accurat. Of course i ahave read that while using the microcontroller, the test results drift twice the erroe in the clock it is