开云体育

On 10/27/2017 2:57 PM, Jim Kortge wrote: On 10/27/2017 2:46 PM, Hans Summers wrote: Hi Jim Just set "6.1 Beacon" to "ON". This means the QCX will power up in beacon mode, and start operating as a

Thanks, Mike. I'm sorry to hear about the accident. I'm not an electronics expert but maybe you just blew something local in the power supply. Wishing you the best. Marc

Thanks, the drinks are on me gladly. Marc g4sra@...> wrote:

Gang, I trying to layout a case for the QCX without having one in hand, and I need a few dimensions. Can someone please give me the part number for the rotary encoder? Thanks, ken

Like a functioning morse code receiver decoding noise, the drinks are on you.

that's the noise being decoded as random morse. Its ok and seemongly working as it should. better than my QCX, it slid off the shelf and shorted on its exposed power clips. now its rather deaf :-(

Completed the kit and powered up No smoke Display lit up All controls functioned Heard noise in earphones Only thing weird – Bottom row of display had a bunch of “T” across the row. Sometimes an

Sadly I've done that once and I wasn't even in a hurry.? 73 NE5U Mike

Hello roger. Didn't the QLG1 survive. It has a voltage regulator capable of a supply voltage of 28 volts. Been there and done the 13.8 thing myself Hi Hi. 73 James. 2E0MUA

In my desperate rush to get back home this weekend and into the shack to change the power supply (thinking it could be a unstable power source and hence being the cause of the problem), I connected my

Thanks for the extremely helpful reactions ! I'll go for 580Hz then. I guess the announced additional configuration menu item on DSP centre frequency is not yet in the current f/w ...? 73, Enno, PF5X

Here are Hans answers to me when I wanted to go for 450 Hz: Hello Rolf ? Yes, there should not be any problem doing that. As I noted in the manual, the CW filter in the QCX is a slightly modified

I did it for 480hz without any changes in audio phase shift frequencies, unwanted side band suppression is still absolutely amazing. Greg w3nw --------------------------------------------

I find the simplest way to control “flying pins” is to position your side cutter on the pin and simply place a fingertip on the pin to be cut. This dampens the “spring” effect and the will

Hi all, I am awaiting my QCX #1229 (per 25 oct 2017, it is the next one to ship ... !). Meanwhile I am preparing a few things and one of them is changing the center frequency for the CW filter. I have

The probable solution is in this thread. /g/QRPLabs/topic/qcx_start_up_issue_correct/6252498?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,6252498

Hilarious, many laughs, thanks folks... Hans, a great explanation of bugs and we're in awe at the QCX and it's development. I look forward to attaching two bugs to the QCX soon, one is from the 1940s,

Enjoyed that..... Who you are, what you do and why you do it came across very well Hans.. Thanks for the kits Phil? G4JVF

Hi all A 20-minute interview recorded at Newark UK National Hamfest on 30-Sep-2017, about QRP Labs and the QCX transceiver. It is in the last 20 minutes of ICQ Podcast episode 252, you can listen at:

Hi Daniel See QCX manual page 115 re "Tuning Clicks" 73 Mike G0CVZ