开云体育

I've read page 3 and 4 of the manual a few times and I still haven't figured out how to make the clock display scroll through the data I put in line #3 and line #4. I have figured out how to screw up

Simon I wish you the best with the display. Marc

Pete WK8S wrote... I have a pair of side cutters with a piece of "spring" metal by one side of the cutters. It is suppose to grip the wire when it is cut off. It does mostly work, but I do kinda

Hi Jim Which firmware version do you have? There was a significant improvement in Tx/Rx noise after the initial firmware version. I'm surprised you have a big click. On all my versions here I operated

Doing better than me, All mine displays is two rows of solid blocks regardless of how the contrast is set. No mistakes as far as I can see. Cant do anything with it, other than put it in the draw

Ouch..!!! Cheers for the info Hans. Keep up the tremendous work. It really is appreciated. 73 James

Thanks Vin I’m learning new stuff every day Marc WB2MSC

Anyone have template with dementions for drilling control holes and making cutout for the LCD? ?72 Geo/W2BPI

Hi Enno Yes correct, this configurable DSP centre frequency is not available yet. But it only affects the CW decoder. The decoder will still work on nearby frequencies but with reduced sensitivity. 73

Hi James Regarding the QLG1: the voltage regulator provides 3.3V to the GPS RF module. So that should survive. However, the 74ACT08 chip is powered directly by 5V, not through the regulator. 13.8V

I have searched this forum to find out a solution to my problem so please bear with me. I had my U3S working just fine, transmitting on 40m WSPR and being heard as far as Canada from here in Virginia,

These letters on bottom line are decoded morse. It is noise but the micro thinks it is morse. 73 vin

I agree, but watch it if you are trimming hard pointed wires or pins. b 73 vin

Page 116 in my manual. 73 vin

Hi. I build all my surface-mount PCBs in a lagge white photogrsphic developing dish. Nowadays i drop one part in 10, but now they don't get lost 73 Vin g4ksy

I did something similar with my first OXCO kit, the sparks were pretty though! I have tried to keep my QCX away from danger but if I do not box it up somehow it could well happen. 73 Roger

On 10/27/2017 2:57 PM, Jim Kortge wrote: On 10/27/2017 2:46 PM, Hans Summers wrote: Hi Jim Just set "6.1 Beacon" to "ON". This means the QCX will power up in beacon mode, and start operating as a

Thanks, Mike. I'm sorry to hear about the accident. I'm not an electronics expert but maybe you just blew something local in the power supply. Wishing you the best. Marc

Thanks, the drinks are on me gladly. Marc g4sra@...> wrote:

Gang, I trying to layout a case for the QCX without having one in hand, and I need a few dimensions. Can someone please give me the part number for the rotary encoder? Thanks, ken