开云体育

I built a U3S, with QLG1. Worked great right from the start (I have limited electronics knowledge, and my only test equipment was a cheap DMM, so I was very pleased and a little surprised.) Because

Trajectory for today. So far,this flight has been a bonus since the first 3 hours.

Day 3 and U3S-18 is back in action. A bit lower in altitude but will most likely rise as everything warms up a bit more. This flight so far surprises me and has been lucky to be in clear sky with such

Hello Carlos Many apologies, I was away on family vacation last week. Now I am back and catching up on all the hundreds of emails but I did not get to dealing with this one yet. I have created order

Hi Hans Could you tell me when the 20 m Low pass filter that is missing is sent to me ? I have the kit assembled but I?m wainting the missing parts. Thanks in advance 73 de Carlos

Hi Manoj That's very interesting. Did you try with some metres of separation between the U3S and QLG1? It's a very difficult issue to investigate because I have never seen it here with my QLG1. I

Hi Chris Control and configuration of the U3S by a serial interface has already been requested by several people and I do intend to work on it.... just have not had time yet! 73 Hans

Chris Wilson 12 September 2017 Probably a question for Hans and others with programming skills. How big a job would it be to create a U3S type device that via a LAN cable, or USB cable,

Hans, An update. I managed to do these. 1. Use shielded cable between GPS and U3S. 2. Tried 3 different power supplies. 2 SMPS and 1 Linear There was no change and I had to change the gps check

Hans Sent from my iPhone Both in same u3s deluxe case. Connection is not shielded. Will change and let you know. Power supply is clean as far as I can tell. But will try a battery. Please give

Hello Manoj If disabling the checksum validation fixes the lack of 3D fix information - then it suggests a hardware issue, not firmware. It does not conclusively suggest it - there still may be a

Hi Hans, Mine is QLG1 which came as a part of U3S Deluxe kit and it suffers from no 3D display. Yes. It will be great if you can go into this. 73 Manoj VU2CPL

Hi all Can someone clarify please: does this happen with the QRP Labs QLG1 GPS http://qrp-labs.com/qlg1 ? Or only with other GPS modules? Does the checksum disable fix it? I am curious as to

JT9 is also being used for tracking balloon location and altitude. Spots are seen here when received under call N2NXZ - https://pskreporter.info/pskmap.html ( https://pskreporter.info/pskmap.html ) It

https://www.ready.noaa.gov/hypubout/124251_trj001.gif ( https://www.ready.noaa.gov/hypubout/124251_trj001.gif )

Hello James, Monday, September 11, 2017 If it deflates and lands back at your place you should get a job predicting lottery numbers :) Remarkable how well it is doing with no battery, I am

Thank you Chris. Maybe it will return over my QTH :)

Hello James, Many happy returns to you and bon voyage to your craft! Monday, September 11, 2017 -- Best regards, Chris Wilson (2E0ILY)

Amazing as it is,U3S-18 returned to life this morning right on time @ 9am EST !! Predicted trajectory appears to be dead on using this website and altitudes of 4200m

My point was that a quick search in the forum would have given this answer much quicker, rather than waiting for someone glued to the computer to answer it again (: