开云体育

Hi all, Long press of Select enters the Menu system, displaying "Audio" (or whatever). But while still pressing Select, turning the Tune knob could exit the Audio menu and instead, select another

That is a great way to inspire wonder and enthusiasm for amateur radio and electronics in general.? Thanks for taking the time from your busy schedule and family to give back to the community Hans!

Dear Hans, It's absolutely wonderful that SSB is working so well now and I am convinced that the triumph of the QMX(+) will now really take off. If I could make a wish as a CW enthusiast: I still hear

I agree 100% on your wire prep. With all the coil wire joints in the QMX and QMX+ this is critical for a successful build. Mike Krieger [email protected]> wrote:

I've never had much luck with the "enamel will burn off when soldering" approach. Sometimes it works but just as often it doesn't. I always scrape with a razor blade and give it a few swipes with a

I would like the bandchanges differently.? Now it is painfull to hop between bands. Going from 15 m to 10 m and then back makes it a lot of double clicks and eventually shuting down the QMX + when

It's worth watching the earlier parts of Mike's video as well. The rattlesnake he encounters on the way to his park activation is beautiful! -- MC VK1MC [email protected]> wrote:

It is really easy. Just connect an USB-cable between your QMX and PC. An soundcard (QMX-soundcard) and new COM-port are added automatically. In VARA you choose the QMX-soundcard for input and output.

Thanks Mustafa TA2MUN for sharing this one with me! The enthusiasm is so infections, might even get ME on SSB eventually! https://youtu.be/P09N-t1U1-E?si=xLUi5bMmboDOEnrL&t=396 73 Hans G0UPL

An 'open' in the LPF (not just a short) may also cause this problem, and is a common assembly issue.? ?Does the LPF sweep for 12m in the Hardware tests give a proper response?

The QMX does not have an internal mic preamp circuit,? so a low-sensitivity -50dB mic element will perform poorly.? ?When you turn up the mic gain enough to get a proper amplitude,? the noise will

Yes, you can run T (TX) from diagnostics screen. SWR doesn't mean anything if there's no output power. I had a bad joint at the L502 (which all output goes through) and after fixing that, saw 3-5W on

Could you share your settings with us? ?Where did audio output from QMX go? ?Are you using VOX for input? ?Any help would be much appreciated.

I second what Richard says. Some QMX/QMX+ units fail to independently restart at the beginning of the firmware update process, and also sometimes after the firmware is loaded.? Just power it on

Yes, I had the same thought. At any rate, whatever transistor is in there, I don't think the glitches are doing any good. Tony AD0VC ________________________________ Sent: Monday, May 5, 2025 7:09 PM

I’m surprised the TN0110’s didn’t fry… [email protected]> wrote:

In Windows my QMX+ shuts off, then I power it back up and it appears as a window/drive. I then drag and drop the new file into that window and when it finishes the qmx+ boots up.

?I am having trouble uploading the newest firmware ?to my QMX+. In "Upload Firmware" window on the QNX+, I click the tune button when "Click Tune" appears, and the QMX screen goes blank, as the

If you want someone to test/repair it for you, the one to contact is Jeff, W1NC.? ?His email is good on qrz.com If you are handy with a multimeter and soldering iron, we can try to help you

This is my approach, I insert? my QRP-O-METER after the radio and switch in its bridge when running the tuner. 73, Don N2VGU