开云体育

That's why I mentioned it in my original post.? The SWR is reported in the Diagnostics page on the terminal when I hit T for Transmit.? For me, it's all over the map, sometimes reporting in the 6-7

Thanks Stan. I never studied magnetics so I wasn't sure how well that little core would react. The wires are still connected and none of the windings have come undone. I'll try gluing it tomorrow. I

Yes, it should work fine if you carefully glue it back together, as long as the wires are not broken. And if you need a new ones, I have used the 330 ones from this Amazon

Great comment.Two thumbs UP. GREG Yahoo Mail: Search, Organize, Conquer On Sun, Apr 6, 2025 at 6:49 PM, John Pokluda via groups.io<john.pokluda@...> wrote: Why on earth take

I had been trying to figure out why I could not make any ft8 qso's. Seemed wsjtx was connected, got audio in my ear when transmitting. Would change radio bands. Turns out I missed when reading the

I think L403 is coming off the board tomorrow.... -- 73 Karl KI4ZUQ

I seem to have found my way into the Monty Python 'room for an argument'

Muhsin is correct.? As I noted in my original reply, some 2.5mm connectors may work.? Some are designed with spring contacts, and are advertised as being compatible with 2.1mm.? And those do

Be aware that the VSWR transformer winding puts a DC (not RF) short across the output BNC connector. 73, Don N2VGU

Thanks Stan and John. I think that's what I probably did; changed the mode from WSPR to CW by mistake during transmission. I'll try again once I am out in another park soon.

It is not a barrel, it is spring based, works with 2.1mm 73 DE muhsin TA1MHS

First check keyer menu and check your not in practice mode and then display and in CW mode. This mistake I have made many times!

Hans's comment is: 5.5 x 2.1 is correct. my comment is: *THIS* *5.5 x 2.5mm* plug on https://www.aliexpress.com/item/1005006380829800.html works with *no problem! * Both are true you can change the

Hard to understand measuring SWR if you truely have 0 watts out... :-) Paul -- AI7JR

Why on earth take the risk with an oversized barrel, even after Hans' otherwise comment?!

I just finished my build sounds similar to your issue 0 watts 9.xx volts swr jumping a little mostly around 1.2-1.5 I am going to start form the bnc and work my way back through the circuit unless I

Stan *THIS* *5.5 x 2.5mm* plug on https://www.aliexpress.com/item/1005006380829800.html works with *no problem!* other people are using it with their PDs and QMXs on POTA activities. I tried to get an

All the mics I have assembled and tested with my QMX+ (which is now a LOT of mics) have had various results. I have not changed the default settings from the SSB firmware, but some elements pick me up

Thanks Dave.....:)

Thanks Ronald....they look promising...:)