开云体育

Dudley, Your post was not “needless”. There are new member to this list every day and rehashing some of the common issues helps to bring new members up to speed. These things happen and we only

Paul, For years I would break something so I could learn about it by doing a repair. BUT over the years I have backed off on that idea and especially on the small hf rigs. If yours is working to

thanks for the information. I don’t use 160m as i don’t have the space for a antenna but a increase on 6m would be useful thanks for a cracking kit had a few 20m & 40m FT8 contacts

Hi Hans, many thanks. I have actually been holding off ordering any of the QMX range in anticipation of the release of the QSX. Not built anything in ages so I am looking forward to the new

Hi Chris Already on my list, OM 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Could the PA modulator be used to adjust the max power on a band by band basis?? This is something that Hans would have to implement but is there any technical reason such as overloading the PA

Hi Ken Currently we're shipping QMX+ with 1_00_027 (not SSB) while the SSB firmware is still so new and beta. Firmware updates are extremely easy to install though. 73 Hans

Chris, Anything is possible but is it worth the trouble? Often it has been remarked that 3dB improvement (1/2 S point) is no big deal. On the other hand an external 20+ watt amplifier would be

stupid but it took me some time to understand. The COM Port can only serve for one program so if you have i.e. a logging software running with the QMX WSJT-X will not connect to the QMX. In my case I

Hi Hans, I have recently ordered a QMX+. Will it come with the CESSB update or will I have to install that myself please? 73 Ken G4APB

CESSB is more than enough. <3 73! de Bekir TA2RX 29 Mar 2025 Cmt 10:12 tarihinde Hans Summers via groups.io <hans.summers= [email protected]> ?unu yazd?:

As a lurker with a QMX+ kit in a sealed box waiting behind a few other projects, "The capacitors are trained to hide in the knobs on these kits" is exactly the sort of nugget I'm looking for! Thanks,

Don is correct I know in the last couple of years I've made an important announcement at Dayton (2023 QMX, 2024 QMX+), please don't get used to it! I don't have capacity to do that every year. 73

Hi Stan Thank you for the quick reply.? I bypassed the LVDO but it made no difference.? But I will try another source.? Thanks...

I would first try a different power source.? Maybe something in your new LVDO is limiting the current such that QMX+ can't complete its startup.

Hi After installing an outboard LVDO voltage regulator (ND6T circuit) my QMX+ boots up to show "Initializing: Audio system" and doesn't respond any further.? Putty doesn't respond either. I have used

Try turning on the EQ then set the EQ to +20. Listen on another receiver for a change. My QMX would start to get raspy at a setting below +14. I set mine at +20 (max) and it sounded pretty good. Then

You can get further on 3W than you might think, I was quite surprised. The PTT signal is already avaliable,? but needs configured.? There is no time line for the Basic code - I think you could

I don’t think I’d hold my breath for Dayton.

Or should I wait to see what's coming out at Dayton that will be even more amazing? But then I won't have time to get it ready for Field Day. Decisions, decisions.