开云体育

Hi, I assembled the QMX rev3, connected it via USB and installed the firmware. I built the 9V version. Firmware is: 1_00_027 ( https://qrp-labs.com/images/qmx/firmware/1_00_027.zip ) I checked via

So saw the new ssb update and got an idea.cellular wired headsets these days are often TRSS and have a button that could potentially be used for ptt. Was debating making an adapter cable by taking a

One unfortunate side-effect of grouping the CW menu items: the firmware no longer remembers the last CW menu items used.? So if I want to quickly change filters, I can't just long-click/click/click

Stan, Brien - KE7WB

Thank you for sharing your settings. Brien, according to Hans' description, this setting is not a time, but a dB/sec recovery rate.? If so, it seems that what you did was speed up the agc

Yes, first of all you need to use either update 01 or 02; the CAT PTT was broken in the original release. Then these settings worked for me, along with setting the output all the way up to 0dB in the

I realize that settings are dependent on microphone, voice characteristics, etc.? but I thought I would publish my current settings that are seeming to work at the moment.? ?Power output is very

Got it working, had to change the microphone setting to "USB". Band conditions on 40 m weren't great, but I did manage to hit speed level 6 on VARA-HF. If anyone has other settings that would be

Just in case others are experiencing this it appears to be because the MIC AGC is enabled and the recovery time was to short.? I had it at 2.? Bumping it to 10 increased the recovry time and so the

Possible bug or invalid default configuration: SSB -> Mic Noise Gate -> Samples set to [100] on a scale of 0-99.? Making a change to this value enforces the range limit.? What should the default be

As info, the power supply I am using indicates 0.6 amps at 9.15 volts when I believe it's transmitting. Idle is 0.137 amps at 9.15 volts. [email protected]> wrote:

Hans wrote in the thread about the new beta firmware that volume should be set to full (0dB referenced to audio full scale) when configuring digital mode software for use with QMX in SSB mode. I

I’m really curious if the Bearcat BC906w wireless mic could be wired up for this. It would most likely need an interface box with power since it needs 8 volts to operate. I believe a 9 volt would

Hello Hans and others, I just uploaded the new firmware and am trying to get Winlink / VARA-HF working. Are there any specific settings that need to be adjusted? When CAT control supposedly keys up

I just got a Baofeng ht spkr mic. ?Going to clip the spkr lead on the cable so no load if it makes contact upon insertion. The 3.5mm is a 4 contact but it appears to have the correct tip to Gnd and

I've also loaded 1_01_002 and I have low output on FT8 and CW. I've also noticed I've had to turn the RF gain almost up to 100. I'm getting about 1.5 watts out, and the QMX is getting hot to the

Bug found with Beta 002 firmware: In SSB Mode, using CAT control for PTT, if I include an intentional delay of about 50 ms or more between switching to TX and beginning to provide output audio via

I had a similar problem - after my build i got the USB drive, loaded the firmware, which seemed to load, but then absolutely nothing.? Forced back into USB drive and the firmware was there.?

We had fourteen folks join the MI QRP Zoom Chat on 20 March. Please join us Thursday March 27 (and every Thursday) at 4PM Eastern for the Michigan QRP Club weekly QRP Chat where the main topics will

Going to Terminal - Configuration - SSB - Transmit EQ and changing a parameter it looks like the terminal is frozen. But there is something going on in the background, maybe calculations to display