开云体育

Have you already done this?? Or are you looking for help getting something setup to read the frequency? If you are looking for help, you might comment on the amplifier input you are using? Many older

Ah ok, I missed that, thanks for the update. Stefan MI0PYN

A phone picture works great when you really get lost counting the number of windings, but I usually just use a small probe to run over the windings one at a time. It keeps from counting a winding

Jeff, If you only have a 6" BNC cable to your EFHW; your radio, USB cable, battery or power supply, your paddles, your headset or speaker, and you yourself become the counterpoise! A separate

New installation QMX+ problem PA Rev.2, software 1.00.27, 9V, transformer WTST Everything works OK - except - On 17m high current (1.5A) at 4.5W out. 6W loss on the finals! (20m and 15m OK with the

Derek, I have had two Solomon soldering stations that I have used for 20+ years. I keep a fine tip on one and a larger flat tip on the other one for larger items like power connectors and coax

Hans said, a few days ago, that he is on vacation until the beginning of Feb. and there will be no updates therefore. 73, Peter OE6PLD

I know Hans is responsive here so I thought I'd try my luck. Hans, I know you're busy, and this is not in any way urgent, but in case it is the result of an oversight, might it be possible to get the

Where was this idea mentioned in the instructions ? ATUs aren’t very bright. ?They initially offer a wild range of match solutions to spot a good one some of which will look like a horrible SWR at

Hello list, yesterday I did a SWR sweep, to "let my tuner learn" - its an LDG AT-100Pro II. On 10m & 12m everything worked fine with 5-6 Tunes. Running it on 15m, the terminal-window got black after

Fldigi v.4.2.06 is installed in "Programs" folder and fldigi.files is installed in my "user" folder. In order to start it well I have checked "run as administrator" in the fldigi.exe file and now I

The file you want is "fldigi_def.xml" and the port audio items start about line 1998. But if this file is in a folder where your user (when you run the program) does not have write permission, I

Where is your installation? Stan tells you the problem. Fldigi writes to the program folder so if you install in "Program Files" then you have to run as Administrator. 73 Alan G4ZFQ.

In order to find a solution I "ran as admistrator" fldigi, checked Portaudio and flrig, "saved config" in the top menu and it works: after closing fldigi it restarts with Portaudio checked. If I start

Stan, I opened this "File - Folders - Fldigi Config" and read its content. Do you know what could be the name of a file in which the configuration is saved, I could perhaps edit it and have Portaudio

I have a spare QDX Rev 5 hi band, purchased at a club sale.??? Does anyone have a low band version that they would like to swap?

Glad you got it working.? Sometimes USB v3 ports do have problems with lower-speed devices. Regarding the save config, I have never had a problem with it. Maybe your user doesn't have write

Stan, I did several things: - I changed the USB cable with one looking nicer and having a ferrite; - I plugged it in another socket of my computer. Until now I plugged it in a USB3 plug and I got a

Thanks for the info.. The dummy load was a home made one... So I'm not too surprised if it's not ideal. To answer the side tone question, there's no tone in either normal or practice mode, and if

Yes, your audio and RF and image sweeps indicate a problem, pretty much indicating there is no signal power getting through. Your SWR sweeps are a bit higher than they should be, but not alarming.?