开云体育

Ooh! That's on sale on Amazon.ca for 10.5 canuck bucks! 72 de Russ, va3rr

G'Day Robb (again) I do like your case, there seems to be enough depth for the encoder knobs. Unfortunately Amazon doesn't ship that case to VK - obviously it is a dangerous item...Hi Hi Rob VK5ZIK

G'Day Robb - I have both the Hi & Low Band QMX. So I have a larger case that holds the antenna, cables, battery, etc I am after an "individual" case to protect the radios individually. Rob VK5ZIK

Hey this is my project :) For QDX and QMX (I done this before by the help of Ross, now it is more clear with QMX+) I am using QMX+'s LPFs and BPFs on those bands Only problem I had was I need more

va3rr, Sounds like you solved your problem. My experience has been leaky DLs work very well without overloading. If they're too well shielded, Doug's idea would be a good one. -- 73, Dan? NM3A

Of course there are more possible reason for non perfect output from IC503 without a load and worse with BS170, a faulty IC or a wobbly voltage supply. 73 Ludwig

Hello all, Today I finished my QMX+ and after some initial configuration / diagnostics I measured the output power by triggering in TX in the diagnostic screen. The power outputs where (for

Hi Steve, I am experiencing the same thing. It starts on 20 m and gets progressively ?louder until so loud on 50 MHz, that band is unusable. I suspected the gps module as another reply suggested

I gave it a whirl. With both rigs plugged into dummy loads, the signal is not very strong at all. I was actually worried about overloading the QMX receiver, but no worries. Alles gut! mni tnx!

Thanks for your quick reply Hans, I realy appreciate it. Yes it is rather early! ?I missed last years convention so eagerly await the 50th and your talk. cheers Dave

Out of curiosity I dragged out my HamGadgets PicoKeyer Plus. That one gives me grief in Iambic A mode, but it's good in Iambic B. This has been educational for me. --Mark K7NEW

Diesel *and* French Fries in the same sentence. To a re-education camp you must go ;-))) -- - 73 de Andy -

6 feet of cheap coax between radios and loads will also do the job. 73, Don N2VGU

Well, since it seems we are getting off topic, I did enjoy the bio diesel smell. Reminiscent of French fries being cooked. -- Wayne S. KF7RCM

Probably to placate the hoarded of YL's sitting in assembly factories. You still inhaled the poison that caused long term health problems though, you were just happier accepting it. On the other

Great news Mark I am always surprised how differently keyers behave. It reminds me of driving a car in the UK. The vast majority have a manual gearbox (stick) and each is a little different.

Thanks Danny & Durk! Danny said: Wow, makes all the difference. I thought I had tried that, but obviously not. Now I'm happy. Thanks! BTW, I tried (just now) sending an "N" in both A and B modes on

The best plans of mice and men.

I remember, also in the 60's, when Detroit, Mi decided to add a scent to their diesel bus fuel.? The end result was worse than prior, but an interesting novelty. Mark K9TR

Yes, that is what I do using the internal keyer: Iambic B and use a single lever paddle. I also use squeeze (twin) paddles in Iambic A mode but with the internal keyer but that's giving me QSD